Pellet carriers

[Str 793]

Any recommendations bought or home made?.

[tomburras 2,730]

These are a nice quiet pellet carier. ......

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F232726998313

 

[bigmac 97kt 13,808]

13 minutes ago, tomburras said:

These are a nice quiet pellet carier. ......

https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F232726998313

 

STR pm me your addy and post code

iv got the same as above and dont use it

ill put it in the post for you

no charge

atvbjimmy

[Str 793]

2 hours ago, bigmac 97kt said:

STR pm me your addy and post code

iv got the same as above and dont use it

ill put it in the post for you

no charge

atvbjimmy

What a lovely gesture thanks very much bigmack ,hopefully I can do the same for you one day.

[philpot 5,032]

Yep, thats our Jimmy, always a big heart and a generous one at that. I also gave mine away a few months ago as I never used it. Several mags in the pocket and a tin with the AA neoprene cover to keep it quiet in the bag.

 

Phil

[bigmac 97kt 13,808]

Here you go STR

its got a few marks on it but still works fine

ill see if i can get it off to you tomorrow mate

ill put a new lace on it for you

atvbjimmy

[Str 793]

Thanks jimmy, no need to sort lace out mate you have done more than enough I can sort that, it looks ideal thank you.

[mark williams 7,561]

I`ve used clear pen tubes for years now.

                  Remove the ink tube, select your pellets, load the pen tubes and away you go.

                  You`ll never have distorted pellets again.

 

 

[Str 793]

1 hour ago, mark williams said:

I`ve used clear pen tubes for years now.

                  Remove the ink tube, select your pellets, load the pen tubes and away you go.

                  You`ll never have distorted pellets again.

 

 

What a good idea, cheers.

[j j m 6,559]

a good idea that is

[Str 793]

It’s arrived jimmy,I’ve put some string on  and give it a polish it looks great thank you very much.

[bigmac 97kt 13,808]

3 hours ago, Str said:

It’s arrived jimmy,I’ve put some string on  and give it a polish it looks great thank you very much.

Looks like new STR

spot on

if you find the pellets still rattle about put a little soft tissue

in and that will stop the rattle

atvbjimmy

[MickC 1,825]

Leather pellet pouches are ok for springers but over time they do allow the pellets to oxidise. All my guns are pcp now (Rapids) so I use cut down Berocca tubes. Do a full shot string of your gun (pcp) , so say it does 200 shots. Take a Berocca tube and glue a bit foam in bottom of tube then cut inside of lid out and glue a bit foam in there. Then pour the 200 pellets into the tube and make a mark. Then you just cut the tube down to the required length for pellets and lid to fit. As a bonus of your Berocca tube holding the full shot count of your gun you know once all the pellets are gone its time for a refill and no need for a gauge/etc which adds more possible leak points to the gun as well as no more guess work and you now save more air, tubes are also water tight . hth

I cant post a pic as Im Offshore but will do once I get home .

Edited August 4, 2018 by MickC
S

[The one 8,506]

I must be tight I just empty the tin into my camo jacket pocket