NEXT/S310 WITH CUSTOM STOCK

[bigmac 97kt 13,821]

Iv been meaning to do this one for months

its my sons rifle with a stunning walnut custom stock

stock is a bit batter,d and the bluing is not the best some rust

so its a full strip down .

This is his nv rifle and he needs it this week so its will be started some time at the end of the week

atvbjimmy

[bigmac 97kt 13,821]

WELL MY SON WILL HAVE TO USE ONE OF HIS OTHER RIFLES

THIS WEEK LOL OR ILL LONE HIM THE HW100

STRIPPED IT DOWN

NOW WHERE DO I START ,,,,,,,,,,,WHAT A FECKING MESS///////////

THE ADJUSTABLE CHEEK PEACE DOSE NOT ADJUST ,,,,WHERE IT IS IN THE PICS IS WHERE IT STAY,S

ITS GOT TWO WALL PLUGS THAT ARE NOT FITTED RIGHT

THE WET PATCH IN THE PICS IS WHERE SOME ONE HAS STARTED TO PUSH THE WOOD WORK OUT

BY NOT HAVING THE SCREW IN THE RIGHT PLACE I HAD TO TAP THIS BACK IN WITH A LITTLE HAMMER

THEN SAND IT BACK .

THE STRAIT LINES OF THE STOCK WERE NOT STRAIT IV HAD TO SAND THEM STRAIT

AND LINE THEM BACK UP .

THE BUTT PAD IS NOT FITTED RIGHT SO I NEED TO SORT THAT AS WELL OR FIT A BIZ ONE

iT LOOKS LIKE A HOME MADE CUSTOM STOCK

IF ITS NOT I WOULD NOT OF BEEN HAPPY WITH THE WORK ON THIS STOCK

IV NOW GOT TO DRILL THE STOCK SO THE CHEEK PEACE IS ADJUSTABLE

AND BUY THE PROPER SCREWS AND FITTING FOR IT

IT MAY OF BEEN THE CASE THAT THE STOCK AT ONE TIME WAS A HOLE STOCK AND SOME ONE HAS CUT THE CHEEK PEACE OFF THEM SELF,S AND MADE A RIGHT MESS OF IT LOL

ANY WAY IV SANDED BACK ONE SIDE AND REMOVED THE DEEP DINGS AND SCRATCHES

JUST NEED TO DO THE OTHER SIDE NOW

AND WHY O WHY DO PEOPLE LACQUER WALNUT STOCKS  

ATVBJIMMY

 

[Jonjon79 13,358]

Feckin wall plugs and big screws in a stock

 

I'll be looking forward to seeing this one finished Jimmy

[bigmac 97kt 13,821]

  On 15/05/2018 at 06:10, Jonjon79 said:

Feckin wall plugs and big screws in a stock

 

I'll be looking forward to seeing this one finished Jimmy

Expand  

DEFO A HOME CUT JON

JUST FOUND THE SCREW HOLE FOR THE BUTT PAD IN THE BACK OF THE CHEEK PEACE

ATVBJIMMY

[Baldcoot 2,352]

Looks like it,s from the Fred Flinstone school of woodwork Mac but i dont think it,l have any problems once you,ve waved your wand over it and made it what it never was.Why do a fake cheek piece and use rawlpugs ???Thats yehaa territory .

Lucky for your son your a mighty fine restoration fettler and he,s going to have a servicable one off working special as opposed to the bodgit n scarper stock that was on it ,look forward to the finished pictures atb Jonny tenthumbs 

[bigmac 97kt 13,821]

  On 15/05/2018 at 07:17, Baldcoot said:

Looks like it,s from the Fred Flinstone school of woodwork Mac but i dont think it,l have any problems once you,ve waved your wand over it and made it what it never was.Why do a fake cheek piece and use rawlpugs ???Thats yehaa territory .

Lucky for your son your a mighty fine restoration fettler and he,s going to have a servicable one off working special as opposed to the bodgit n scarper stock that was on it ,look forward to the finished pictures atb Jonny tenthumbs 

Expand  

Dont really mind the cheek peace work i have to do to it

its the lacquer i just hate to see a walnut stock with lacquer on it

the hole point of a walnut stock is that you get to oil it and caress it and rub oil all over it

and fondle it every now and again  lol.

Ill have her right by the time im done with her mind

atvbjimmy

 

[bigmac 97kt 13,821]

Dose any one know where i can get the proper fittings

for the adjustable cheek peace

or a link to who sells them

atvbjimmy

[si brown 8,486]

Thought you were busy and not fettling ya wood

now put it down and go spank a few patios in...

 

propper brick layers joinery that

atb si 

[bigmac 97kt 13,821]

Got the first coat of oil(tung oil) on her

it has sunk strait into the wood

so she will need another some time today

all marks and dings have gone

now she looks like a walnut stock .

Im having the comp risers made for her

and will have to drill two holes in the side of the stock for the screws to fit so she can be adjusted with ease .

atvbjimmy

 

 

[mark williams 7,563]

Transformation already there Jimmy.

 

                               Looking great . 

[bigmac 97kt 13,821]

Put the stock back together lads had to put the big old screws back in

as my son needs it in the next few days

in his words its the rifle iv jell,d with dad i need it i told him to take the hw100 but in his words

FECK THAT IF OUT WAS TO HAPPEN TO IT ID HAVE TO LEAVE THE COUNTRY

may be there is some truth in that lol

iv not even looked over the action yet im off to work soon so will look over it some time to day

stock now looks like a walnut stock and she is stunning

she may need another coat of tung oil on her before i put the rifle back together

atvbjimmy

[bigmac 97kt 13,821]

Just used a touch up gel on the bluing for now

it dose need a full de,blue and re,blue but thats for a later date

(need to get some bluing )

and iv re sprayed the fill cap and mod and screws and silver washers

just need to put it all back together once dry

before pics

 

[bigmac 97kt 13,821]

After

[bigmac 97kt 13,821]

Well thats it for now on this one lads

just hope my son is happy with it

it needs a right hand bolt on her as well as its a lefty one that is fitted to her

so he will have to get one or may be a big bolt that would set her off lol

atvbjimmy

[Jonjon79 13,358]

I'd be well happy with that

 

....... The dog's growing well mate