Jump to content

Advice wanted


Recommended Posts


  On 24/03/2018 at 17:25, Lance82 said:

Thanks big mac, very detailed instructions

is that what u think then lads? Just a strip n clean?

Expand  

Yes that is all it needs

take the old grease off and new on

wish this was all this one needed lol

just had to buy a new cylinder for this and hope fully a hole new trigger and safety

now this is a full strp down lol

even the bluing

atvbjimmy:thumbs::thumbs::thumbs:

P160113_18.34.jpg

P160113_18.35.jpg

Link to post

Brilliant that Mac well done, just to add Lance, dont blather the spring in moly grease when you put it back together, get some moly PASTE, and just a light covering is all thats needed, if you can get a tin of dri slide spray about a fiver off fleabay, and some silicon oil, de grease everything, moly paste on the spring, dri slide on the piston, and just a light dab of silicon oil on the piston seal, it will shoot smoother, and I guarantee it wont diesel any more, good luck mate, as Mac said, any probs give us a shout.

Link to post
  On 26/03/2018 at 08:42, charlie caller said:

Brilliant that Mac well done, just to add Lance, dont blather the spring in moly grease when you put it back together, get some moly PASTE, and just a light covering is all thats needed, if you can get a tin of dri slide spray about a fiver off fleabay, and some silicon oil, de grease everything, moly paste on the spring, dri slide on the piston, and just a light dab of silicon oil on the piston seal, it will shoot smoother, and I guarantee it wont diesel any more, good luck mate, as Mac said, any probs give us a shout.

Expand  

Thanks very much for the sound advice cc. Im gonna get the stuff i need and give it a bash 1 night when kids are in bed and well out the way. I am a complete novice whos never seen the insides of any rifle, never mind attempt any fix or maintain. 

  • Like 1
Link to post

Lance if you dont want to take the barrel out of the cylinder

just cock the rifle and knock the pin out that holds the cocking leaver in place

ONLY ONCE YOU HAVE REMOVED THE SPRING

now this pin is like a split pin and you will need some thing the same size to knock it through if not it will only get tighter as you tap it .

this way you will not need to dismantle the barrel from the cylinder

ill mark on a pic witch pin it is for you

atvbjimmy:thumbs::thumbs::thumbs:

PS,,you may need to take the trigger safety off as it sits in front of the end cap

just take a pic of it before you do so you know how it go,s back together

and there is a trigger spring that sits in the end cap and on the trigger just pull this down and out

Theres only one way to learn Lance just do it ;)

 

P160113_14.07_[01].jpg

  • Like 1
  • Thanks 1
Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...