philpot 4,969 Posted February 21, 2018 Report Share Posted February 21, 2018 Right boys, my pal has just bought a s/h HW100 s which went to Hull Cartridge for a service just prior to my pal buying the gun. It shoots fine BUT has dumped all it's air over the last week whilst in the cabinet. Now I assume there is a seal which is damaged but as I have never had this issue when I had my HW100, I am lost as to what to do. Soooooo where is the seal that normally causes this problem, I am guessing that he will need to remove the cylinder and I suppose the seal is either on the cylinder or where the cylinder fits the gun. Can someone help this useless ole tart out as many of you know that I am as practical as a chocolate fire guard when it comes technical stuff on air rifles, I just point and squeeze leaving the bits I don't do to you lot. I should say this is from an RFD so no issue with taking it back but if it is a dead easy fix that you lot would just do yourselves, it may be a better way. Phil Quote Link to post
toby63 1,236 Posted February 21, 2018 Report Share Posted February 21, 2018 theres a small oring on the brass where you screw the cylinder onto . or fill cylinder off the gun so you will b able to tell if its gun or cylinder at fault 2 Quote Link to post
rick12345 181 Posted February 21, 2018 Report Share Posted February 21, 2018 Same as that ^^ Quote Link to post
philpot 4,969 Posted February 21, 2018 Author Report Share Posted February 21, 2018 Cheers me dears Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.