Scope question

[philpot 5,005]

I have jumped a page or two here so sorry if this has been covered. Do you have a spare scope to try, that would take care of the scope situation. What scope are you using as I may have something you could borrow if you don't have a spare.

One other thing to chuck into the equasion is the mounts. A few years ago, I had a set of Hawke mounts on my HW100 and I had variation of zero over different distances on the windage turret and no matter what I did, I could not get to the bottom of the issue so I bought a set of BKL mounts........................no more issues. Just a thought.

 

Phil

[big napper 3,606]

Cheers mate for the offer, i can get a scope but checking other things first

[big napper 3,606]

Just cronod it and from full last time i checked it was 11.7 -11.8 ftlb prety much all the time.

Today it started at 11.2 then 11.5 with 1 full mag, 14 shots the highest was 11.5 and lowest 11.2 and all different in between so could that be the problem.

( and whats causing this)

I checked the silencer and its not clipping it.

[Rabid 1,936]

15 minutes ago, big napper said:

Just cronod it and from full last time i checked it was 11.7 -11.8 ftlb prety much all the time.

Today it started at 11.2 then 11.5 with 1 full mag, 14 shots the highest was 11.5 and lowest 11.2 and all different in between so could that be the problem.

( and whats causing this)

I checked the silencer and its not clipping it.

Sounds quite a variation for a hw mate, I would stab a guess it needs a service and seals.

 

rather than working on ft lb, can you stick the string up showing variation between fps ? I run mine over the chrono and I had an extreme spread of 4fps on a full mag, and 6fps over 3mags, yours sounds a heck of a lot more than that.

 

another way to check, can you fix the gun in a bench vice and see how it shoots, if the gun cannot move, but the shots do, you know it's not the scopeand has to be the gun or pellet.

[big napper 3,606]

I cant remember ever getting it a full service and reseal so i think il get that done first ( it must need one by now) and if it happens after that il just get a new scope, between those two it should sort the problem out, cheers for all the help and advice lads.

[Furrosious ferreter 499]

Dont over look the mounts, get bkl or sports match

FF

[big napper 3,606]

Th mounts are solid mate iv checked them

[steg 609]

1 hour ago, big napper said:

Just cronod it and from full last time i checked it was 11.7 -11.8 ftlb prety much all the time.

Today it started at 11.2 then 11.5 with 1 full mag, 14 shots the highest was 11.5 and lowest 11.2 and all different in between so could that be the problem.

( and whats causing this)

I checked the silencer and its not clipping it.

That variation might just be the pellets.. only takes about 10 fps with say a heavy pellet to go from 11.2 to 11.5. Wouldn't have thought 10 fps would knock your zero off bn.

 

[big napper 3,606]

No i dont think the pellets are the problem either mate, cheers