Bush Rummager 4,570 Posted January 17, 2018 Report Share Posted January 17, 2018 I've had this a few weeks now fella's and after a few rushed and failed attempts.. I've actually just managed to get it on! Does it look like a half decent job though? or shall i try again? Though I'd ask before i snip the excess tie band's off. Cheers.. Quote Link to post Share on other sites
Greyman 28,438 Posted January 17, 2018 Report Share Posted January 17, 2018 Could be a little tighter but as long as you can pull the pouch back to your anchor point without it undoing alls good, you can get a metre of tbg and a roller cutter on eBay for about a £10 mate then you can play around all day Quote Link to post Share on other sites
Mr Wilkes 2,988 Posted January 17, 2018 Report Share Posted January 17, 2018 That’s good enough mate, (next time I would cut the strips thinner and it’ll bed in better.) Quote Link to post Share on other sites
Bush Rummager 4,570 Posted January 17, 2018 Author Report Share Posted January 17, 2018 Thank's for getting back gent's. I'll get some band and a cutter ordered thanks Greyman, I'll definitely be needing some of that at some point and don't sound bad for ten sheet's. Mr. Wilkes.. those strips are the one's that came with the catty and band from Wasp. I will do what you say though onece I've got the band and cutter. It seems to hold well enough when stretch out. I'm going to take it into work tomorrow and give it a test run, (might as well get paid for it), i got a bag of the yellow pratice ammo too. I'll be having a word with the maintenance man there aswell to sort me some nice 9.5/10 mm bearings out.. he owes me a favour! 1 Quote Link to post Share on other sites
dave88 1,565 Posted January 18, 2018 Report Share Posted January 18, 2018 Like has been said mate could be a bit tighter but as long as it does the job...aint gotta look pretty 1 Quote Link to post Share on other sites
the monkey 338 Posted January 19, 2018 Report Share Posted January 19, 2018 Looks like it could have been stretched more when wrapping it but give it a try i found with my wasp it suited out better get out and enjoy there good catapults Quote Link to post Share on other sites
the monkey 338 Posted January 19, 2018 Report Share Posted January 19, 2018 Just looked again it he bands are on the wrong way when you shoot the wasp sign should be facing you Quote Link to post Share on other sites
Mr Wilkes 2,988 Posted January 20, 2018 Report Share Posted January 20, 2018 A vid for you bushy ?? 1 Quote Link to post Share on other sites
johonawhitness 110 Posted January 20, 2018 Report Share Posted January 20, 2018 The bands are on wrong.it's not that the sign should be facing you(dose help is you do thumb pince grip as thumb can sit in the slot where the badge is glued in on the other side) your problem is your bands on the inside of your forks,there ment to go around the outside, Quote Link to post Share on other sites
dave88 1,565 Posted January 20, 2018 Report Share Posted January 20, 2018 40 minutes ago, johonawhitness said: The bands are on wrong.it's not that the sign should be facing you(dose help is you do thumb pince grip as thumb can sit in the slot where the badge is glued in on the other side) your problem is your bands on the inside of your forks,there ment to go around the outside, I think the bands have just been pulled round to show everyone how he tied them 1 Quote Link to post Share on other sites
Bush Rummager 4,570 Posted January 20, 2018 Author Report Share Posted January 20, 2018 30 minutes ago, dave88 said: I think the bands have just been pulled round to show everyone how he tied them That's right Dave.. the logo is facing me when shooting. It does seem odd though.. when you hold it, it seems natural that the logo should be facing away from you??? Many thanks for the replies fellas. Once I've had a session with it how it is, I'll undo the band and re-tie it tighter.. if i can!! Cheers for the comment again. Total beginner. So just what I was after!?? Quote Link to post Share on other sites
the monkey 338 Posted January 20, 2018 Report Share Posted January 20, 2018 The bands are still on wrong Quote Link to post Share on other sites
dave88 1,565 Posted January 21, 2018 Report Share Posted January 21, 2018 (edited) 9 hours ago, the monkey said: The bands are still on wrong . Edited January 21, 2018 by dave88 Quote Link to post Share on other sites
johonawhitness 110 Posted January 21, 2018 Report Share Posted January 21, 2018 Common lads wake up lol. Logo either way personal preference, I have mine facing away so my thumb sitts nice in the indent on the other side,depends on your hold of that helps or not.. ok the bands are still on wrong wrap and tuck looks like it'll do the job fine. Just the bands go on the outside of the forks ,get on YouTube mate 1 Quote Link to post Share on other sites
the monkey 338 Posted January 21, 2018 Report Share Posted January 21, 2018 The logo faces you as this way the edges are contoured, if you have it the other way the edges are quite sharp 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.