trapperman 474 Posted January 10, 2018 Report Share Posted January 10, 2018 ? I'm gunna build a nice big harth for it I get a couple of Euro pallets every month at our shop, I've been saving them I have about 25 ish now all the same size so makes it easier just going to make it up as I go, pallets for the main structure with old roofing tin and I might have to get some ply sheets or osb sheets to line the outside as I'm going to use it for camping out aswell 1 Quote Link to post Share on other sites
Bosun11 537 Posted January 10, 2018 Report Share Posted January 10, 2018 11 hours ago, Arry said: I have a Coalbrookdale Little Wenlock MK 1 multi fuel burner with a back boiler been outside under a tarp for about a year if anybody wants it come and get it. Its bloody heavy and would need one of them three wheel sack trucks to get it down my steps. Fitting instructions are inside it was used for two or three years from new. The back boiler can be filled with sand iv'e been told if you don't want to use it, don't now if thats right. Cheers Arry Nice gesture Arry, them Wenlocks are decent all rounders and will last years. Put up your location and i'm sure somone will come for it. Quote Link to post Share on other sites
Bosun11 537 Posted January 10, 2018 Report Share Posted January 10, 2018 After ten ton of research (fecking easier choosing a car!) I have been dead keen on a Clearview BUT went to a showroon and got my head turned by a newcomer on the market called Clock... Very impressive stoves. So we'll see... Quote Link to post Share on other sites
Greyman 28,239 Posted January 10, 2018 Report Share Posted January 10, 2018 3 hours ago, trapperman said: This is the one I'm gunna get Do they make them for different size barrels, as a 45 gallon drum will take up a lot of floor space ? Quote Link to post Share on other sites
Arry 21,597 Posted January 10, 2018 Report Share Posted January 10, 2018 1 hour ago, Bosun11 said: Nice gesture Arry, them Wenlocks are decent all rounders and will last years. Put up your location and i'm sure somone will come for it. Totnes , Devon mate. Don't want any thing for it. Cheers Arry 4 Quote Link to post Share on other sites
green lurchers 16,616 Posted January 10, 2018 Report Share Posted January 10, 2018 3 1 Quote Link to post Share on other sites
Rabid 1,936 Posted January 10, 2018 Report Share Posted January 10, 2018 4 hours ago, trapperman said: This is the one I'm gunna get That looks spot on, thanks for sharing, might get me one for the workshop. Quote Link to post Share on other sites
Rabid 1,936 Posted January 10, 2018 Report Share Posted January 10, 2018 23 hours ago, Greyman said: I,m going for a simular design I have a small gas bottle and will put hinges on the square I cut out for the door and use a scaffold tube for a chimney might make a small ash drawer in the bottom if there's room, will probably be summer by the time I get it done but I,ll wack some pics up when it's done Can't see a scaffold tube been big enough mate. I made a Bbq very similiar and the tube is bigger than scaff tube but still not big enough. 1 Quote Link to post Share on other sites
scothunter 12,609 Posted January 10, 2018 Report Share Posted January 10, 2018 Mine hogging the fire too green lurchers lol 2 Quote Link to post Share on other sites
Rabid 1,936 Posted January 10, 2018 Report Share Posted January 10, 2018 It's a dog thing.... 3 2 Quote Link to post Share on other sites
Rabid 1,936 Posted January 10, 2018 Report Share Posted January 10, 2018 Even goes and lays in front of it when not lit 2 Quote Link to post Share on other sites
trapperman 474 Posted January 11, 2018 Report Share Posted January 11, 2018 2 hours ago, Greyman said: Do they make them for different size barrels, as a 45 gallon drum will take up a lot of floor space ? It says they fit 55 and 30 gallon barrels haven't seen any other size but I found a video on utube where a guy fits one to a smaller barrel he just has to trim the edge a bit so it sits flat my barrel is a 45 gallon so I may have to adjust it a little and use some extra heat proof sealant if the flue collar isn't quite the right angle Quote Link to post Share on other sites
Greyman 28,239 Posted January 11, 2018 Report Share Posted January 11, 2018 16 hours ago, trapperman said: It says they fit 55 and 30 gallon barrels haven't seen any other size but I found a video on utube where a guy fits one to a smaller barrel he just has to trim the edge a bit so it sits flat my barrel is a 45 gallon so I may have to adjust it a little and use some extra heat proof sealant if the flue collar isn't quite the right angle Sweet, thanks for the info, be nice if someone in the uk started making them recon there would be a good demand, Quote Link to post Share on other sites
Chaff 3,590 Posted January 11, 2018 Report Share Posted January 11, 2018 Calor gas bottles make neat burners lots on you tube about them simple to make. Quote Link to post Share on other sites
Greyman 28,239 Posted January 11, 2018 Report Share Posted January 11, 2018 19 hours ago, Rabid said: Can't see a scaffold tube been big enough mate. I made a Bbq very similiar and the tube is bigger than scaff tube but still not big enough. I think the length has a big bearing as much as the diameter, I know a lad that has made a tiny woodburner from a section of square channel and it draws fine though a scaffold tube, the French use 3" flu,s on there big stoves which would be illegal here but they seem to work, it's just my lads have a pile of bent poles in the yard so thought I,d use that maybe I,ll double it up like a side by side shotgun if I need more draw on it ? 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.