meg1 55 Posted January 6, 2018 Report Share Posted January 6, 2018 Hi I've just fitted a stainless drop in kit made to fit one of my Diana 52s with a Titan spring, I've run a load of pellets though it playing around today and I've got to say its running just as nice as my other two Diana's with vmack and vortex kit's, is anyone else using them and what do you think of them? 1 Quote Link to post
si brown 8,486 Posted January 6, 2018 Report Share Posted January 6, 2018 I can see advantages of delrin top hat to balance the piston but ive had all sorts of stuff in mine and keep going back to steel guides at the latch! I wont be buying any more drop in kits. looks like a nicely made bit of kit that meg atb si 1 Quote Link to post
Rez 4,960 Posted January 7, 2018 Report Share Posted January 7, 2018 I only go Vmach myself. Never let me down in the past, and hasn't to this day. I did have a TBT in me PS mind. Wish I was more into this tuning lark. Once it's bob on, I don't tend to f**k about with it. I may know more if I did however. My general thinking is steel is heavier than delrin. The heavier internals cause heavier bounce... heavier recoil etc. We can't deny physics. Id second si again this day, it does looks a decent cut that. 1 Quote Link to post
bigmac 97kt 13,781 Posted January 7, 2018 Report Share Posted January 7, 2018 10 hours ago, Rez said: I only go Vmach myself. Never let me down in the past, and hasn't to this day. I did have a TBT in me PS mind. Wish I was more into this tuning lark. Once it's bob on, I don't tend to f**k about with it. I may know more if I did however. My general thinking is steel is heavier than delrin. The heavier internals cause heavier bounce... heavier recoil etc. We can't deny physics. Id second si again this day, it does looks a decent cut that. Same hear Rezzzmonnd v mach all ways mate and never let me down ether my new 97 has the tbt kit in her iv got nothing against them but its getting a v,mach as soon as its here mate . and polished with in an inch of its life just like the last one atvbjimmy 1 Quote Link to post
Jonjon79 13,358 Posted January 7, 2018 Report Share Posted January 7, 2018 That looks like quality kit Meg I never knew anyone did a stainless kit. Quote Link to post
si brown 8,486 Posted January 7, 2018 Report Share Posted January 7, 2018 3 hours ago, bigmac 97kt said: Same hear Rezzzmonnd v mach all ways mate and never let me down ether my new 97 has the tbt kit in her iv got nothing against them but its getting a v,mach as soon as its here mate . and polished with in an inch of its life just like the last one atvbjimmy save your money vortek seal and a home tune.... 60yrd this aft 8.44grn daystates light breeze and full of cold! atb si 6 Quote Link to post
villaman 9,983 Posted January 7, 2018 Report Share Posted January 7, 2018 Had a v mach in my HW97.177 so bloody harsh in the end took it out and replaced with originally ,with a bit of spit and polish + lube still spot on today 1 Quote Link to post
meg1 55 Posted January 7, 2018 Author Report Share Posted January 7, 2018 It's a homemade job by my dad, great having an engineer in the family, the gun is really spot on as good as any of the others kits I have fitted on performance, the idea is to never need to replace it and can handle a power increase if I want it, the Diana 52 is just ticking over at sub 12ft, very impressed, cheers dad 2 Quote Link to post
si brown 8,486 Posted January 7, 2018 Report Share Posted January 7, 2018 at work I put plastic between metal when I dont want it to slip Quote Link to post
bigmac 97kt 13,781 Posted January 13, 2018 Report Share Posted January 13, 2018 On 1/7/2018 at 18:22, villaman said: Had a v mach in my HW97.177 so bloody harsh in the end took it out and replaced with originally ,with a bit of spit and polish + lube still spot on today NOUT WRONG WITH V,MACH MITCH YOU JUST GOT TO KNOW WHAT TO DO WITH THEM AND HOW TO FIT THEM AND POLISH THE SHIT OUT OF EVERY THING AS WELL you will not still have it laying around by any chance Mitch atvbjimmy Quote Link to post
bigmac 97kt 13,781 Posted January 13, 2018 Report Share Posted January 13, 2018 On 1/7/2018 at 15:13, si brown said: save your money vortek seal and a home tune.... 60yrd this aft 8.44grn daystates light breeze and full of cold! atb si Si i love the fecking stock on that 97 mate Like i say to rezmond about his 97 she may live at yours but she is mine atvbjimmy 1 Quote Link to post
just-A-snap 1,269 Posted January 13, 2018 Report Share Posted January 13, 2018 Happy is all one can ask for meg1. enjoy mate All the very best 1 Quote Link to post
davyt63 1,845 Posted January 14, 2018 Report Share Posted January 14, 2018 Nice one Meg, your location is nr two very good clubs I have visited over the years. Furnice mill fisheries & Nomads HFT club, both cracking clubs with a lot to offer. ? Quote Link to post
meg1 55 Posted January 14, 2018 Author Report Share Posted January 14, 2018 9 hours ago, davyt63 said: Nice one Meg, your location is nr two very good clubs I have visited over the years. Furnice mill fisheries & Nomads HFT club, both cracking clubs with a lot to offer. ? I've just relocated mate, I was living just on the Herefordshire border by the Malvern Hills, beautiful bit of country, but I was in the process of buying my first property and I couldn't touch the house prices so have moved to North Shropshire I've got a detached rural property for the price of a 3 bed semi near Malvern, just got my first bit of permission a good bit as well, over 2000 acres so I'm as happy as Larry 2 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.