tomburras 2,730 Posted January 2, 2018 Report Share Posted January 2, 2018 TBT kits come well over the required lentgh and need cutting down. For a cutting guide I use the old spring - and cut it slightly longer so you don't end up underpower. I prefer to just have the spring without any power washers. If its over you can remove another coil. When your happy give the ends a really good polishing. When you size your piston seal fit it to the end of the piston and put it in your drill as you do when polishing the piston and spin it and with really fine wet and dry size it down a tiny bit at a time so it runs up and down the cyl smothly but still seals 100% perfect. A sparing smear of bum slide on the piston and after a few hundred pellets is super slick. I hope this helps fellman mark and I'm sorry if you already knew this stuff! It's good fun isn't it and very satisfying! 2 Quote Link to post
Fellman Mark 607 Posted January 2, 2018 Author Report Share Posted January 2, 2018 The spring that came out was i a right mess and I chucked it out oops ? I done very little regarding air gun repairs so all help and info is appreciated ??? 1 Quote Link to post
tomburras 2,730 Posted January 2, 2018 Report Share Posted January 2, 2018 Oops ha ha! I did a 77 a good while back and in the back of my mind I think l cut the spring to 255 mm finished lentgh. Edit. Maybe message TBT he is very helpful and I would imagine he will know roughly for sure. 1 Quote Link to post
Fellman Mark 607 Posted January 2, 2018 Author Report Share Posted January 2, 2018 Ok thanks I’ll message him Quote Link to post
mole trapper 1,693 Posted January 2, 2018 Report Share Posted January 2, 2018 Something not mentioned yet is that Nick (tbt) gives incredible after sales service and advice. Most of my Springer's have his kits in. 2 Quote Link to post
bigmac 97kt 13,796 Posted January 2, 2018 Report Share Posted January 2, 2018 7 hours ago, tomburras said: TBT kits come well over the required lentgh and need cutting down. For a cutting guide I use the old spring - and cut it slightly longer so you don't end up underpower. I prefer to just have the spring without any power washers. If its over you can remove another coil. When your happy give the ends a really good polishing. When you size your piston seal fit it to the end of the piston and put it in your drill as you do when polishing the piston and spin it and with really fine wet and dry size it down a tiny bit at a time so it runs up and down the cyl smothly but still seals 100% perfect. A sparing smear of bum slide on the piston and after a few hundred pellets is super slick. I hope this helps fellman mark and I'm sorry if you already knew this stuff! It's good fun isn't it and very satisfying! Only done one and it came with the rifle new mind ,,,,must of all ready come cut down before i got them both Sorry Mark , atvbjimmy 2 Quote Link to post
Elmerfudd 5 Posted January 3, 2018 Report Share Posted January 3, 2018 (edited) Hi Mark, if the kit doesn't fit the titan spring you've bought just return it with your new spring for a free replacement bespoke one. Edited January 3, 2018 by Elmerfudd 1 Quote Link to post
Fellman Mark 607 Posted January 3, 2018 Author Report Share Posted January 3, 2018 Thanks Elmer but I bought the full kit instead it came today and looks good just waiting on my vortex seal then she can go back together ? 2 Quote Link to post
Fellman Mark 607 Posted January 4, 2018 Author Report Share Posted January 4, 2018 Still waiting on the seal ? I got a 10% of voucher for Tbt with my kits if any one wants it ? Quote Link to post
si brown 8,486 Posted January 4, 2018 Report Share Posted January 4, 2018 1 hour ago, Fellman Mark said: Still waiting on the seal ? I got a 10% of voucher for Tbt with my kits if any one wants it ? did you get an email from Tony saying he got your order?! ive ordered another one tonight and he replied within half hour, hes a mint bloke to deal with and stuffs usually in the next post! atb si Quote Link to post
Fellman Mark 607 Posted January 4, 2018 Author Report Share Posted January 4, 2018 Hello yes I got a text saying it I’d be in the next post there no stress I only ordered it Tuesday 1 Quote Link to post
Fellman Mark 607 Posted January 5, 2018 Author Report Share Posted January 5, 2018 I Message tony today and some how Paypal has gave him the wrong address so he popped another in the post for me foc top man ? 2 Quote Link to post
tomburras 2,730 Posted January 5, 2018 Report Share Posted January 5, 2018 What a gent! Quote Link to post
si brown 8,486 Posted January 5, 2018 Report Share Posted January 5, 2018 4 minutes ago, Fellman Mark said: I Message tony today and some how Paypal has gave him the wrong address so he popped another in the post for me foc top man ? thought something might be amiss, he's good at getting stuff out fast! last time I spoke to him his delivery of new seals got sent to some fecker in the Middle East 1 Quote Link to post
Jonjon79 13,358 Posted January 6, 2018 Report Share Posted January 6, 2018 I'll second the comments on here - Vortek Tony and Tinbum Nick are both top blokes to deal with ........ Good kit and fast deliveries. Nick's got the patience of a saint - I've fecked up an HW piston extension and a TX spring guide through being a ham fisted a twat Both times he helped me out and made sure I was up and running again asap. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.