tomburras 2,729 Posted November 21, 2017 Report Share Posted November 21, 2017 9 hours ago, bigmac 97kt said: That stock has some nice grain in it Tom I would use the tru oil on her mate if you want a dark look just put the stain on the way i told you but keep wetting a little bit so you can see what its going to look like once its oil,d atvbjimmy Cheers Jimmy I keep thinking about using tru-oil again iv done quite a few stocks with it and used rustins red mahogony stain on them first and they came up amazing. I'l do a test patch with hand rubbed oil and see what colour it is. For some reason I really want to try a hand rubbed oil finnish. Ill do a test patch first and if it's too light I'll go with the stain/tru-oil route. 1 Quote Link to post
tomburras 2,729 Posted November 21, 2017 Report Share Posted November 21, 2017 3 hours ago, si brown said: ive filled the pores in like him tom only on walnut though when the pores grab me whiskers it gets on me tits! didn't use linseed just what ever oil I was using to do the stock... only ever did the cheek pice though atb si Cheers Si sounds good did you just do a light wet sand with oil to fill them? When iv used tru-oil iv applied and buffed in tiny amounts over 7-10 coats after my initial couple of normal coats, and filled them that way. They came up with a perfect glass smooth glossy Finnish after all these tiny layers. Took a long time tho. Quote Link to post
bigmac 97kt 13,780 Posted November 21, 2017 Author Report Share Posted November 21, 2017 This is what i use Tom even throw its walnut stain it works mint on a beach stock and you can build the coats up with it before you oil it atvbjimmy Quote Link to post
tomburras 2,729 Posted November 21, 2017 Report Share Posted November 21, 2017 That' the stuff iv used too. Iv always used the red mahogany as I like a red tinge but once I used both and it turned out the best stock I ever did on an aya. I dunno what to decide on now lol I think I may strip it and see how the natural wood looks when wet. Shall I start a topic when I do it? Are shotgun stock refinishing topics allowed in this section with it just been wood? Or maybe I should start one in the shotgun and FAC section ? Quote Link to post
si brown 8,486 Posted November 21, 2017 Report Share Posted November 21, 2017 1 hour ago, tomburras said: Cheers Si sounds good did you just do a light wet sand with oil to fill them? When iv used tru-oil iv applied and buffed in tiny amounts over 7-10 coats after my initial couple of normal coats, and filled them that way. They came up with a perfect glass smooth glossy Finnish after all these tiny layers. Took a long time tho. ive not got that much patience tom, I took fine wet and dry and dry sanded/rubbed to get the dust then hit it with the oil... not a very authentic way but it worked! 1 Quote Link to post
philpot 4,969 Posted November 22, 2017 Report Share Posted November 22, 2017 10 hours ago, tomburras said: That' the stuff iv used too. Iv always used the red mahogany as I like a red tinge but once I used both and it turned out the best stock I ever did on an aya. I dunno what to decide on now lol I think I may strip it and see how the natural wood looks when wet. Shall I start a topic when I do it? Are shotgun stock refinishing topics allowed in this section with it just been wood? Or maybe I should start one in the shotgun and FAC section ? It is only a stock Tom, so put it anywhere or both sections. Phil 1 Quote Link to post
tomburras 2,729 Posted December 15, 2017 Report Share Posted December 15, 2017 An update jimmy..... Quote Link to post
tomburras 2,729 Posted December 15, 2017 Report Share Posted December 15, 2017 Bit slow had no spare time but taught I'd stick a pic up ? 1 Quote Link to post
si brown 8,486 Posted December 15, 2017 Report Share Posted December 15, 2017 6 minutes ago, tomburras said: Bit slow had no spare time but taught I'd stick a pic up ? thats gonna come up mint tom 1 Quote Link to post
tomburras 2,729 Posted December 15, 2017 Report Share Posted December 15, 2017 I hope so is! Its been awful lately no spare time to go shooting so this little project is keeping me sane it's the nearest thing iv done to using a gun in weeks ? 1 Quote Link to post
tomburras 2,729 Posted December 15, 2017 Report Share Posted December 15, 2017 I was gonna do a hand rubbed linseed oil Finnish but I'm going to follow jimmys advice and have true oil and wood stain on the way. Quote Link to post
bigmac 97kt 13,780 Posted December 15, 2017 Author Report Share Posted December 15, 2017 38 minutes ago, tomburras said: Thats got some nice grain in it and some nice swirls to she is going to look ace Tom atvbjimmy Quote Link to post
tomburras 2,729 Posted December 15, 2017 Report Share Posted December 15, 2017 Fingers crossed jimmy - I honestly only paid 30 something pounds for the gun! it cost more for the sandpaper stain and oil! Ha ha it will fold and fit into my longnet basket too. 2 Quote Link to post
bigmac 97kt 13,780 Posted December 15, 2017 Author Report Share Posted December 15, 2017 Some times the old ones are the best ones Tom just the fact there still around and going strong proves that I bet in 30,,40,,50,,years some of the new modern rifle will not be around but the old ones will . atvbjimmy 1 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.