help needed

[shoota 0]

i have a logun pump i put the valve on it to pump up my air rifle it put it up to the pressure that was in the gun and would not pump up any further can any one send me a photo of the mechanism inside of the pump and how they work or if there is any one that can service this for me send me a pm i will call you. i have no guarantee on the gun as it was bought second hand.

thanks alot shoota

[stubby 175]

are you saying the gun is empty and you cant pump any in??

 

if so, its because you cant pump enough pressure in by hand to close the valves, with a pump, its recomended that you re fill the gun when half empty, if its totally empty it needs a fill from a bottle, as that has enough pressure to close the valves, then top up each time after 40 or so shots

 

hope that helps

[shoota 0]

  stubby said:

are you saying the gun is empty and you cant pump any in??

 

if so, its because you cant pump enough pressure in by hand to close the valves, with a pump, its recomended that you re fill the gun when half empty, if its totally empty it needs a fill from a bottle, as that has enough pressure to close the valves, then top up each time after 40 or so shots

 

hope that helps

no it is half full and trying to fill it back to the top just got th pump second hand not doing me any favors ha ha i never let the gun go under 10 bar normally shoot 50 shots then re fill it.

thanks any way

[andy s410c 61]

Hi Shoota,i use the Logun pump the problem i had was leaking air as i did,nt tighten my Air Arms adaptor up enough so air was escaping the gun would charge up but it took forever :download: not wishing to sound like a t**t you have closed the bleed valve on the pump & everything is tightened up so no air is escaping...

[huntergatherer 0]

  shoota said:

i have a logun pump i put the valve on it to pump up my air rifle it put it up to the pressure that was in the gun and would not pump up any further can any one send me a photo of the mechanism inside of the pump and how they work or if there is any one that can service this for me send me a pm i will call you. i have no guarantee on the gun as it was bought second hand.

thanks alot shoota

just send it back to logun £35 for a service £17 for all the seals =new pump

[shoota 0]

  andy s410c said:

Hi Shoota,i use the Logun pump the problem i had was leaking air as i did,nt tighten my Air Arms adaptor up enough so air was escaping the gun would charge up but it took forever :download: not wishing to sound like a t**t you have closed the bleed valve on the pump & everything is tightened up so no air is escaping...

yea i have everything tightened i think it is the same the brass valve that i nip onto the pump pipe air might be escap[ing from there because it pumping right end everything but it struggles thats all took it to its and had a look and the metal rod inside the pumpo was bent straightened that back up its a bit bewtter buty still not right think i will send it off to get serviced and re sealed thanks alot