Chairgun

[Phill-W68 547]

Hi all, just joined the forum, I purchased a 2nd hand hw100kt in.177 and I have put a new mtc viper connect 3-12x32 on top with low mounts and the AMD reticle but I can't figure out which reticle to use on chairgun, any help would be gratefully appreciated.. I own a chrono and have done some testing in the back garden at 19yds, TY

[just-A-snap 1,269]

If in doubt try generic, or send an email to Hawke and ask their advice.

And Welcome and pleasant times

[mark williams 7,553]

Welcome to the forum Phil .

 

You have chosen probably the best pcp there is in the HW 100 KT .177 - I also use this set up for pest control/ hunting.

 

I can`t help you with chair gun as I`m old school

 

Have a butchers at " Best zero range for both .177 and .22" in the search engine ( top right corner) at the start of this page, it should prove helpful.

 

One of the lads will be along soon with the chair gun question ( one of the boffins ).

 

atb Mark.

 

P.S. Although the picture zero is 36 yds.

 

This zero at 38 yds ( for .177),will keep your pellet within a 1 inch kill zone from basically 9.7 yds to 38 yds ( sorry it`s a pigeon head lads )

 

[villaman 9,983]

Try Strelok ,you can get it for Apple or android

[David.evans 5,323]

That Fukien pigeon haunts me !

[mark williams 7,553]

Does it ?

 

 

Picture pm`d x

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Twat

[David.evans 5,323]

No mark , please for fook sake at least draw a new one , lol

Twat

[villaman 9,983]

That Fukien pigeon haunts me !

Just like the photos of the pigeons he post on here ,the ones some one shot for Mark

[Phill-W68 547]

Cheers guys, I will have a look at the different options maybe send HAWKE an email too...

[David.evans 5,323]

 

If this is your reticule , then it's mill dot , and on chair gun use 10x 1/2

I think I'm write

Atb

[Jonjon79 13,358]

This is the AMD reticle Dave.

 

....... I've no idea what one to use on Chairgun though.

 

Good luck.

[David.evans 5,323]

Oops sorry for the bum info

Thanks John xx

[Durham John 693]

This is the AMD reticle Dave.

 

....... I've no idea what one to use on Chairgun though.

 

Good luck.

just use a combination of daves and jonjons,

 

its a basic 1/2 mil dot spacing

 

10x 1/2 mil dot will do it'll just not look the same as jonjon pic

[David.evans 5,323]

I knew JJ was a twat

But that's another story , lol

Down load this mate and your on the money

 

Nice to be nice

Atb

[David.evans 5,323]

I knew JJ was a twat

But that's another story , lol

Down load this mate and your on the money

 

Nice to be nice

Atb