The Lgv Walther Master Pro .177 Has Landed.

[bigmac 97kt 13,787]

Told ya Mark now get it stripped, de grease it remove the Walther gunk, polish the hell out of the spring ends, relube it lightly, not much on the spring, and fit a top hat and slip washer, it makes them even smoother (if you can imagine that) oh and wait until you fit a silencer, you wont Adam and Eve it mate, good choice, top quality rifle.

I do like the under lever Tim

 

by the way have you got any further with the Kral

 

or has it beat you as well lol

 

atvbjimmy :thumbs:

[stecorr 75]

where did you get it from and how much did you pay if you dont mind me asking..hoping to have one in my hands within the next 8 weeks or so

[mark williams 7,551]

What`s up with Mac and Rezeh then ?

 

If you two actually shoot something you too could put a photo up, for once.

 

 

" only saying like" x

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

pair of twats xx

 

p.s. Stecorr, £350 Warrington guns

[bigmac 97kt 13,787]

I dont post every thing i shoot Mark

 

AND IT WOULD STILL BE THE 97 FOR ME

 

atvbjimmy :thumbs:

[mark williams 7,551]

Well I respect your choice mate, - you know that .

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If it`s in .177

[charlie caller 3,654]

 

Told ya Mark now get it stripped, de grease it remove the Walther gunk, polish the hell out of the spring ends, relube it lightly, not much on the spring, and fit a top hat and slip washer, it makes them even smoother (if you can imagine that) oh and wait until you fit a silencer, you wont Adam and Eve it mate, good choice, top quality rifle.

I do like the under lever Tim

 

by the way have you got any further with the Kral

 

or has it beat you as well lol

 

atvbjimmy :thumbs:

 

Yes and no mate, I am waiting for a scope to arrive for it, I have done some fettling, polished the life out of the hammer and tried a few hammer springs, I think I have found the sweet spot, around 160 bar down to about 110 bar, it is shooting consistently and most of the twang has gone, its a strange pcp for sure, it seems to favour light pellets which as you know is normally the preserve of springers, I am looking forward to getting it scoped up and doing some pellet testing, so far its making the most ftlbs with faps, and accupels, so we shall see mate.

[bigmac 97kt 13,787]

 

 

Told ya Mark now get it stripped, de grease it remove the Walther gunk, polish the hell out of the spring ends, relube it lightly, not much on the spring, and fit a top hat and slip washer, it makes them even smoother (if you can imagine that) oh and wait until you fit a silencer, you wont Adam and Eve it mate, good choice, top quality rifle.

I do like the under lever Tim

 

by the way have you got any further with the Kral

 

or has it beat you as well lol

 

atvbjimmy :thumbs:

 

Yes and no mate, I am waiting for a scope to arrive for it, I have done some fettling, polished the life out of the hammer and tried a few hammer springs, I think I have found the sweet spot, around 160 bar down to about 110 bar, it is shooting consistently and most of the twang has gone, its a strange pcp for sure, it seems to favour light pellets which as you know is normally the preserve of springers, I am looking forward to getting it scoped up and doing some pellet testing, so far its making the most ftlbs with faps, and accupels, so we shall see mate.

 

Nice one Tim

 

Hope it works well for you mate

 

keep me up dated on her bud

 

she did like super domes Tim i got the best groups with them

 

atvbjimmy :thumbs:

[charlie caller 3,654]

Light pellets again mate, right will try them too, cheers.

[philpot 4,986]

 

 

Told ya Mark now get it stripped, de grease it remove the Walther gunk, polish the hell out of the spring ends, relube it lightly, not much on the spring, and fit a top hat and slip washer, it makes them even smoother (if you can imagine that) oh and wait until you fit a silencer, you wont Adam and Eve it mate, good choice, top quality rifle.

I do like the under lever Tim

 

by the way have you got any further with the Kral

 

or has it beat you as well lol

 

atvbjimmy :thumbs:

 

Yes and no mate, I am waiting for a scope to arrive for it, I have done some fettling, polished the life out of the hammer and tried a few hammer springs, I think I have found the sweet spot, around 160 bar down to about 110 bar, it is shooting consistently and most of the twang has gone, its a strange pcp for sure, it seems to favour light pellets which as you know is normally the preserve of springers, I am looking forward to getting it scoped up and doing some pellet testing, so far its making the most ftlbs with faps, and accupels, so we shall see mate.

 

Am I still on the look out for a scope Tim or have you found anything.

 

My RFD has said that he can get an SMK mildot 3-9 x 44 for about £35 if that is any good. As I have not got a spare scope at the moment, I will go halves with you on the scope if that is any good matey.

 

Phil

[charlie caller 3,654]

Many thanks mate, I have one on the way, much appreciated.

[villaman 9,983]

Told ya Mark now get it stripped, de grease it remove the Walther gunk, polish the hell out of the spring ends, relube it lightly, not much on the spring, and fit a top hat and slip washer, it makes them even smoother (if you can imagine that) oh and wait until you fit a silencer, you wont Adam and Eve it mate, good choice, top quality rifle.

I thought the you cant fit a silencer on because the the original one is glued on or do add it to the end of the original one ?

[charlie caller 3,654]

It is not a silencer mate, its a barrel weight, you unscrew a cap to expose the thread, so the requirement is a silencer the same diameter as the barrel weight so it matches up, on one of these a silencer is an absolute must, they are unbelievably quiet.

[villaman 9,983]

so makes it longer and uglier then

I can remember, think it was airgun gear show them removing the muzzle weight by unscrewing it and adding a mod

[charlie caller 3,654]

Yes mate it does make it longer, not sure about uglier though, I am sure the weight can be removed, there is a grubscrew, but when you undo it, nothing happens, I suspect its locktighted on, so heat would be required to remove it, I rather like it personally, but each to his own.

[philpot 4,986]

Many thanks mate, I have one on the way, much appreciated.

Okay Tim, let me know if your scope falls through as I do have a spare now.

 

Phil