Help With P.c.p Bottle And Leads Please

[mr practice 27]

hi there

 

i got my weirauch hw100t and all other bits and the diver bottle looked at instructions for gun on connecting bottle, it looks confusing as the connections in weihrauch instructions dont look like same connectors. i mean im not stupid when it comes to stripping and building stuff i used to build computers for people to there spec. but with compressed air you have to be a little carefull, the connection i got is i believe its called a DIN here is a pic of bottle and lead below you see the lead the big end screws into the bottle yes but you know the small end the din does my quick fill adaptor for the gun screw in there there is no other attachments at all the ones you get with the gun the brass ones are defunkt apparently they arnt used anymore. because of these newer DIN ones so is that ok let me know cheera

 

 

dave leeds

 

 

 

 

 

 

[David.evans 5,323]

You should have got a fill prob , that screws into the whip and the end to the bottle , look on the rifle cylinder, on one side you will find a push out plug , that's where the prob fits

[David.evans 5,323]

 

 

Should have one of these

Atb

[bigmac 97kt 13,780]

first take the dust probe out

[bigmac 97kt 13,780]

second fit the fill adapter

[bigmac 97kt 13,780]

third push the fill adapter into the charging point

 

where the dust protector came out of

[David.evans 5,323]

Nice jimmy a problem future paints a thousand words

Atb

[bigmac 97kt 13,780]

4th make sure this is turned off as you will let all the air out of your bottle if you try and fill it with it open

[bigmac 97kt 13,780]

turn this slowly to fill the air cylinder

 

while keeping an eye on the gauge

[bigmac 97kt 13,780]

5th

 

fill it to your bar fill with the hw100 its 200bar

[bigmac 97kt 13,780]

when its at its 200bar fill turn this off

[bigmac 97kt 13,780]

Then and only then open this to release the pressure you will hear a gush of air

 

Do NOT BE ALARMED

 

you need to do this to remove the fill probe from the air cylinder

 

DO NOT UNDER ANY CIRCUMSTANCES TRY TO REMOVE THE FILL PROBE WITH OUT RELEASING THE PRESSURE FIRST

 

HOPE THIS HELPS

 

ATVBJIMMY :thumbs:

[Furrosious ferreter 499]

Welldone bigmac.... perfect.

 

My monkey just read that, now his outside filling my guns with air.

 

Thumbs

 

FF

[Rez 4,957]

I heard, that if you blow really hard onto the trigger it will fill the bottle without any need for a tank mate.

[mr practice 27]

Then and only then open this to release the pressure you will hear a gush of air

 

Do NOT BE ALARMED

 

you need to do this to remove the fill probe from the air cylinder

 

DO NOT UNDER ANY CIRCUMSTANCES TRY TO REMOVE THE FILL PROBE WITH OUT RELEASING THE PRESSURE FIRST

 

HOPE THIS HELPS

 

ATVBJIMMY :thumbs:

 

hi there

 

mac cheers dude perfect no probs now will be carefull cheers mate for taking the time to put piccys up for me mate much appreciated thank you

 

 

dave leeds