si brown 8,486 Posted March 18, 2017 Report Share Posted March 18, 2017 this is just because of the hw quality issues, I'm not saying ones better.. but is the british is just as bad!! my mates has had a prosport for about 4 months now and to say i wasn't to impressed when he first got it was an understatement !! my mates not one for fettling stuff but he knows I'm always at it... so after us having a swap round a couple of weeks ago he passed it over to me and said can you sort it!! the first stage of the trigger sticks and docent release when cocked and theres no real second stage a fart would set it off!! the cocking mech sounds like its been used in a desert.... the twang was fcuking shocking!!! best of british!! i think not and the photos coming up will verify this ready for dissection fist impression.. its blathered on grease, it docent look as bad in pic second the piston is bone dry and the p rings are rough as the threading on the transfer port housing is off and this has resulted in this the buttons on the opposite side are non existent!! now this has not gone unnoticed because there are obvious tool marks but its been sent out! and yeah there was swarf floating about! so i did my bits and bats and put it back together, its way smoother now but the power is a 1 lb down on pre strip due to the compression tube now being centre and needing new t/p o rings cos the old ones are all splattered all sortable but this is supposed to be the british bench mark!!! wtf atb si 5 Quote Link to post
Rez 4,961 Posted March 18, 2017 Report Share Posted March 18, 2017 So you've had your PS apart and found it like this? Is it secondhand? To be fair Si, I'm rather surprised about those internals. 1 Quote Link to post
si brown 8,486 Posted March 19, 2017 Author Report Share Posted March 19, 2017 So you've had your PS apart and found it like this? Is it secondhand? To be fair Si, I'm rather surprised about those internals. its 4 months old rez and bought new ... the grease is fresh and it had not been opened up so its not blag sale! i text my mate to ask him if it was new cos the t/p seals were MASHED up its been used for a few hunting sessions and i mean a few and maybe a bit plinking ! im gonna fit a couple of new o rings and give airarms a call and see if they will send me some new buttons up, it'll be under guarantee still but they'll just say its void now cos its been opened up I'm gutted for my mate cos its a right mess and a bloody expensive spinger 1 Quote Link to post
bigmac 97kt 13,823 Posted March 19, 2017 Report Share Posted March 19, 2017 Think iv still got your addy and post code SI ill send this one down tomorrow mate it just needs a clean up atvbjimmy :thumbs: 1 Quote Link to post
si brown 8,486 Posted March 19, 2017 Author Report Share Posted March 19, 2017 cheers jimmy.. your a star ill get this fcuked up one re studded and new rings n give you it when your down next!! whats your take on this jim... I'm shocked, i bet its not done a full tin and your comp tube looks 100% better atb and cheers si Quote Link to post
bigmac 97kt 13,823 Posted March 19, 2017 Report Share Posted March 19, 2017 If i did not know better i would of say,d its not new looks like a second hand rifle that they have sold as new or could be its stood in the factory to long and in the rfd,s to long and the grease has dry,d up hence the damage to the piston and the internals it seems all the manufactures are going through this quality control badness But then again in my opinion I DO THINK ITS A SECOND HAND RIFLE THAT HAS BEEN SOLD AS NEW ILL GET THAT SENT OFF TOMORROW MORNING FIRST THING SI atvbjimmy :thumbs: 2 Quote Link to post
bigmac 97kt 13,823 Posted March 19, 2017 Report Share Posted March 19, 2017 Phone AA,s and give them the serial no they will tell you when it was sent out and to witch rfd then you will know if it was new or second hand i must say mind im surprised at AA there usually good very good atvbjimmy :thumbs: 2 Quote Link to post
si brown 8,486 Posted March 19, 2017 Author Report Share Posted March 19, 2017 If i did not know better i would of say,d its not new looks like a second hand rifle that they have sold as new or could be its stood in the factory to long and in the rfd,s to long and the grease has dry,d up hence the damage to the piston and the internals it seems all the manufactures are going through this quality control badness But then again in my opinion I DO THINK ITS A SECOND HAND RIFLE THAT HAS BEEN SOLD AS NEW ILL GET THAT SENT OFF TOMORROW MORNING FIRST THING SI atvbjimmy :thumbs: that was my first impression so i asked my mate, he's got the reseat ill have a look at the box! i can tell the spring is new and the oil on the top hat and bottom guid is fresh as u like, there was no discolouring at all! don't want to tell me mate he's been fleeced cos he'll drag the bloke over the counter Quote Link to post
just-A-snap 1,269 Posted March 19, 2017 Report Share Posted March 19, 2017 Refurbished? Sold as new? All the best 1 Quote Link to post
si brown 8,486 Posted March 19, 2017 Author Report Share Posted March 19, 2017 Refurbished? Sold as new? All the best quite possibly Renos... theres not a single mark on it externally though! all i know is one of three tings will happen 1 he'll get his money back 2 he'll get a new one 3 he'll get locked up for battering the bloke at the shop I'm betting on 3 atb si 1 Quote Link to post
just-A-snap 1,269 Posted March 19, 2017 Report Share Posted March 19, 2017 Refurbished? Sold as new? All the best quite possibly Renos... theres not a single mark on it externally though! all i know is one of three tings will happen 1 he'll get his money back 2 he'll get a new one 3 he'll get locked up for battering the bloke at the shop I'm betting on 3 atb si Like so many other things, we are taken for granted in the UK. We complain as if we was to blame. Not Saying do it. Just Saying Number Three Sound GOOD. All the best 1 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.