bigmac 97kt 13,796 Posted March 10, 2017 Author Report Share Posted March 10, 2017 So we did the A,S again with a lighter pellet acupell 14,23gr and now she is running at 9,02ftp and im happy at that thats all i need for the crows but nothing a washer or two would not sort out lol atvbjimmy :thumbs: Quote Link to post
bigmac 97kt 13,796 Posted March 10, 2017 Author Report Share Posted March 10, 2017 I'll send money up now Mac Bank transfer or pp Pm me how much you need mate Atb Thanks but no thanks you can keep your money twat i told you this is a gift from me and the lads up here me,,,viz,,,little hunter,,,belucky and his brother ill have her running over a 11 if it kills me lol atvbjimmy :thumbs: 2 Quote Link to post
mark williams 7,557 Posted March 10, 2017 Report Share Posted March 10, 2017 Oh yes I'm buying school shorts , cap and a dirty white shirt with the tail hanging out , Back to basics mate , I might even build a static hide , in fact I will ! It will do 35/40 yards won't it Atb Not at the moment it wont Just had her crono,d at the rfd,s and its only running at 3,9 so a new spring will be needed and a new piston seal ill get them some time this week and get her sorted the tornado is the one on the right the A,S is on the left both with jsb exact jumbos 15,89 gr they both dont like them A,S 7,05ftp atvbjimmy :thumbs: Just give it him at 3.9 ft/lbs Mac, it`ll go with his shorts and attempts at static hunting . x. 1 Quote Link to post
philpot 5,003 Posted March 10, 2017 Report Share Posted March 10, 2017 Right Jimmy, I understand now mate. I was going to say that I would be up for buying one of these guns if available but I just didn't quite realize what the project was. I must have missed some detail in an earlier post / thread. Just me being a dim twat as per usual. Phil 1 Quote Link to post
bigmac 97kt 13,796 Posted March 17, 2017 Author Report Share Posted March 17, 2017 By the way David iv not forgotten your tornado mate i keep going back to her the stock has had that many coats of oil on her she is now getting to look like glass iv taken the pellet port out and sorted that sorted the under leaver out as well and got onto chambers and the good news is she is a SUPER TORNADO AND SHOULD HAVE TWO SPRINGS IN HER ONE INSIDE THE OTHER it was Marks comment that made me think hears your stock up till now still not finished with it yet atvbjimmy :thumbs: 1 Quote Link to post
bigmac 97kt 13,796 Posted March 17, 2017 Author Report Share Posted March 17, 2017 few more Quote Link to post
David.evans 5,323 Posted March 17, 2017 Report Share Posted March 17, 2017 Fec in ell , that looks the dogs Mac Your a star mate The way your rebuilding this ,I'll end up scared to use it , lol Atb mate Quote Link to post
bigmac 97kt 13,796 Posted March 18, 2017 Author Report Share Posted March 18, 2017 Well took the knackered one apart and look what i found in side David same action as yours so will pop this in side once i get the piston seal and see what she is putting out the other tornado is fecked and the piston has seen better days so i will salvage it for parts atvbjimmy :thumbs: 1 Quote Link to post
mark williams 7,557 Posted March 18, 2017 Report Share Posted March 18, 2017 Yep, that`s the rifle I shot with at just 14 yrs of age. I shot a lot of vermin with the Relum Should hover between 9.5 to 10.5 ft/lbs. in .22. I never saw a .177 in the Supers ? Another great classic to the fold Happy days, atb Mark. 2 Quote Link to post
si brown 8,486 Posted March 18, 2017 Report Share Posted March 18, 2017 Well took the knackered one apart and look what i found in side David same action as yours so will pop this in side once i get the piston seal and see what she is putting out the other tornado is fecked and the piston has seen better days so i will salvage it for parts atvbjimmy :thumbs: whats the deal with a spring inside a spring jimmy?! seems a bit hmmm atb si ps.. you getting out tonight?! the weathers nice here compared to what the forecast says!!! 1 Quote Link to post
mark williams 7,557 Posted March 18, 2017 Report Share Posted March 18, 2017 The coils ran in opposite directions, - bit more power as a guess ? recoil dampener ? If I remember rightly I swapped the larger spring for a Mercury spring and put the slimmer spring back in also.( or did I,- long time ago) Quite a beast after the muck about atb Mark. 2 Quote Link to post
si brown 8,486 Posted March 18, 2017 Report Share Posted March 18, 2017 The coils ran in opposite directions, - bit more power as a guess ? If I remember rightly I swapped the larger spring for a Mercury spring and put the slimmer spring back in also.( or did I,- long time ago) Quite a beast after the muck about atb Mark. you mean it passed the yellow pages test 1 Quote Link to post
bigmac 97kt 13,796 Posted March 18, 2017 Author Report Share Posted March 18, 2017 It was some thing Mark say,d to me about the one he had and two springs so i went on chambers and found out this was a SUPER TORNADO so got the diagram up and yes its got two springs one inside the other the piston seal is going to be a pain as its held on with a rivet and i dont have a clue at the moment as to how im going to fit the new one . Iv removed the old fecked one but the rivet is still in so may have to cut this out ill send Charlie a few pics he may know how its done this one has me baffled lol but ill get there in the end atvbjimmy :thumbs: 2 Quote Link to post
mark williams 7,557 Posted March 18, 2017 Report Share Posted March 18, 2017 Ha! Ha! Ha! yes Si !!! 2 Quote Link to post
bigmac 97kt 13,796 Posted March 18, 2017 Author Report Share Posted March 18, 2017 Yep, that`s the rifle I shot with at just 14 yrs of age. I shot a lot of vermin with the Relum Should hover between 9.5 to 10.5 ft/lbs. in .22. I never saw a .177 in the Supers ? Another great classic to the fold Happy days, atb Mark. You can get a titan spring now Mark and you still put the thin spring in side the titan now what power would that put out lol atvbjimmy :thumbs: Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.