PeskyWabbits 464 Posted March 2, 2017 Report Share Posted March 2, 2017 Charlie caller/peskywabbits is this the right stuff?.... Look at this on eBay http://www.ebay.co.uk/itm/361738029999 Yes, that's it. Halfords had it at £6.98 for 120ml which would be better if you were using it on bike forks, but the smaller one, on an air rifle will probably last you 40 years. Or maybe 10 if HW don't get their act together Quote Link to post
tomburras 2,730 Posted March 2, 2017 Author Report Share Posted March 2, 2017 Cheers peskywabbits. Quote Link to post
charlie caller 3,654 Posted March 2, 2017 Report Share Posted March 2, 2017 Charlie caller/peskywabbits is this the right stuff?.... Look at this on eBay http://www.ebay.co.uk/itm/361738029999 I use the aerosol spray but Im sure that will be fine mate, its good stuff. Quote Link to post
Richard Collett 102 Posted March 3, 2017 Report Share Posted March 3, 2017 I'm interested in how this thread pans out as I'm in the middle of playing with my 99s. Good luck mate 1 Quote Link to post
Rez 4,961 Posted March 3, 2017 Report Share Posted March 3, 2017 Let us have it back when its done tom 1 Quote Link to post
tomburras 2,730 Posted March 3, 2017 Author Report Share Posted March 3, 2017 Let us have it back when its done tom Of course! 1 Quote Link to post
tomburras 2,730 Posted March 4, 2017 Author Report Share Posted March 4, 2017 Well the parts have all arrived!.... And the drop in kit is soo well made cut to right lentgh finished perfect and even pre lubed and ready to drop in. Well happy..... I'm working in the living room today iv got blue tits checking out the bird box and don't want to miss the action!.... 3 Quote Link to post
tomburras 2,730 Posted March 4, 2017 Author Report Share Posted March 4, 2017 Polished out cylender.... Polished piston and sized down vorteck seal... Opened up cocking link for smoother cocking.... The wd drop in kit is longer springed .177 kit to up the power 1 Quote Link to post
tomburras 2,730 Posted March 4, 2017 Author Report Share Posted March 4, 2017 I fired 5 shots then started writing down the fps..... 1 Quote Link to post
villaman 9,983 Posted March 4, 2017 Report Share Posted March 4, 2017 Nice about 5fps spread if you don't count the first two . May be a bit more preload just to bring it up a bit 1 Quote Link to post
tomburras 2,730 Posted March 4, 2017 Author Report Share Posted March 4, 2017 Yes I got some washers in the kit. Will sort it tonight if I get time. I wasn't expecting to need them to be honest. Quote Link to post
tomburras 2,730 Posted March 4, 2017 Author Report Share Posted March 4, 2017 Nice about 5fps spread if you don't count the first two . May be a bit more preload just to bring it up a bit Hi villaman what fps do you get with your imp? Quote Link to post
villaman 9,983 Posted March 4, 2017 Report Share Posted March 4, 2017 Nice about 5fps spread if you don't count the first two . May be a bit more preload just to bring it up a bit Hi villaman what fps do you get with your imp? About 627 fps using falcon accuracy plus these are the best pellet to test mine with Quote Link to post
tomburras 2,730 Posted March 4, 2017 Author Report Share Posted March 4, 2017 Cheers villaman. Quote Link to post
Greyman 28,438 Posted March 4, 2017 Report Share Posted March 4, 2017 Alright dude not wishing to piss on your fire, but it may improve performance if you hone the inside of the cylinder rather than polishing it smooth, the grooves left in the cylinder after honing allow a film of oil to line the cylinder allowing for a much smoother cycle, were as two smooth surfaces will cause minute friction and slow the piston down ever so slightly, much the same as the cylinder in a car engine, I used a brake cylinder hone on mine as there a simular size cost around £15 if I remember correctly Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.