bigmac 97kt 13,796 Posted February 24, 2017 Author Report Share Posted February 24, 2017 few more SORRY LADS BUT ITS SO BARRY CAN SEE HOW ITS GOING AND FOR THE LADS THAT ARE INTERESTED ATVBJIMMY :thumbs: 9 Quote Link to post
Jonjon79 13,358 Posted February 24, 2017 Report Share Posted February 24, 2017 It's looking good Mac I reckon the striping on the stock is going to look really nice 1 Quote Link to post
si brown 8,486 Posted February 24, 2017 Report Share Posted February 24, 2017 you wona stop sorting these stocks out and go and sort ethans barber out!! he should get some post tomorrow atb si Quote Link to post
bigmac 97kt 13,796 Posted February 24, 2017 Author Report Share Posted February 24, 2017 coming on nicely jimmy are you pulling another night shift tonight atb si Not tonight si im fecked but then again iv started the relum lol but i think this one may beat me on the blueing side may have to paint this one as the rust and the pitting is bad real bad , most of the screws and pins are seized in the spring is as bad as the 35 and piston is even worse im going to soak it in wd40 tonight lol atvbjimmy :thumbs: 2 Quote Link to post
bigmac 97kt 13,796 Posted February 24, 2017 Author Report Share Posted February 24, 2017 Im out of likes lads so a will have to do for now atvbjimmy :thumbs: Quote Link to post
johnbaz 363 Posted February 24, 2017 Report Share Posted February 24, 2017 You're doing a fab job of the 35L Jimmy Regarding the black stains, Depending upon what it is, A bleach bath may removove it, If it's an oil stain, Oxalic acid will most likely remove it Here's a Mk1 HW80 that I bought from a local dive shop, It was pitted very deeply so I had it on my 30"x1" linisher but only on the slack area above the platten, Kept going until i'd removed metal to the bottom of the deepest pit!! I polished it then a mate got it Hot chemically re blacked for me.. Stripped and partially polished. Reblacked The whole. This is the same as the one I used Can't wait to see all the guns refinished- Grand job mate John 3 Quote Link to post
bigmac 97kt 13,796 Posted February 24, 2017 Author Report Share Posted February 24, 2017 Nice john very nice I was going to put the grinder to it with a flap disc on it but Viz told me not to as it would put flat spots on her so did it all by hand lol Im fecked the night mind im leaving the stock until tomorrow ill give her a rub over with the wire wool then put the first coat of tru oil on her then let it dry before the next coat , just got to polish the piston and chamber and get rid of some of the old shit from inside her now then she will be ready for the new spring and piston seal and the breach seal then put her all back together i just hop Barry is happy with her . Just dont know what piston seal is on her its as if there were two one inside the other the outer one dose not look like leather and the inner one is hard plastic atvbjimmy :thumbs: 3 Quote Link to post
Jonjon79 13,358 Posted February 24, 2017 Report Share Posted February 24, 2017 i just hope Barry is happy with her . Are you kidding? I bet he'll be over the feckin moon with this ...... A nice bit of engineering, refurbed well - that little rifle will out last all of us 2 Quote Link to post
Bunnyblatter 1,012 Posted February 24, 2017 Report Share Posted February 24, 2017 Mac you are a magician with the restoration jobs. No other word for it mate. 2 Quote Link to post
belucky 751 Posted February 24, 2017 Report Share Posted February 24, 2017 i just hope Barry is happy with her . Are you kidding? I bet he'll be over the feckin moon with this ...... A nice bit of engineering, refurbed well - that little rifle will out last all of us BARRY IS OVER THE MOON WITH IT 2 Quote Link to post
bigmac 97kt 13,796 Posted February 24, 2017 Author Report Share Posted February 24, 2017 i just hope Barry is happy with her . Are you kidding? I bet he'll be over the feckin moon with this ...... A nice bit of engineering, refurbed well - that little rifle will out last all of us BARRY IS OVER THE MOON WITH IT Cheers lads Barry im chuffed that your happy with it but you should see her in the flesh the pics do not do her Justice You will not want to take her out lol atvbjimmy :thumbs: Quote Link to post
mark williams 7,558 Posted February 24, 2017 Report Share Posted February 24, 2017 Lovely job of them all, as per Mac p.s. I`m with the other lads - Cadet Major mate. atb Mark. Quote Link to post
bigmac 97kt 13,796 Posted February 24, 2017 Author Report Share Posted February 24, 2017 Well had a few hours to kill so i set about the Relum Tornado got her as best i could by hand and just put the first coat of blueing on her but before i did i used a dremmel with a tiny wire brush and got into all the places i could not by hand and it worked a treat could not take her all apart as most of the screws were seized tight lol atvbjimmy PS,,and i blued her lads not painted but did think i was going to have to lol 2 Quote Link to post
Rez 4,961 Posted February 24, 2017 Report Share Posted February 24, 2017 Mac. You make me sick. F'sake. Just look at that... from what it was to that. Almost wish I had something rusty you could work on.... 2 Quote Link to post
bigmac 97kt 13,796 Posted February 25, 2017 Author Report Share Posted February 25, 2017 Mac. You make me sick. F'sake. Just look at that... from what it was to that. Almost wish I had something rusty you could work on.... Well REZ you will need two sick bags for this just put the second coat of oil on this ABSOLUTE STUNNING STOCK you will need some tissues atvbjimmy :thumbs: 1 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.