Jump to content

Condensation


Recommended Posts

Gone and got my rifles in from the garage. Out the slips in the kitchen and the amount of condensation appearing has done my swede in. I know I shouldn't of left them out in the cold last night, and do bring them in for the winter [1 day late it would seem] but its got me worried. Left them out now to come back to normal temperature. They have done this before when Ive been out on a cold day, but I've been there. Does condensation just disappear? Apologies for the 'lack of scientific' knowledge.

 

Anyone else had this happen? Condensation appear when its cold... Any drop in performance?

  • Like 1
Link to post

Because metal gets very cold it attracts the moisture from any surrounding warmer air.

Ever got your aluminium ladders out and there wet through and freezing even though it`s not been raining ? Same goes for a very cold gun barrel.

The inside of your van roof is the same ( coldest spot).

Cold barrel left unattended inside a gun bag = rust. ( we`ve "ALL" done it :icon_redface: )

 

Just put an open gun bag over a radiator and dry your gun off and then wipe over with a lightly oiled cloth :thumbs: , then put the gun away dry and in a warm environment.

 

 

Mark Williams & Sons,

Technical Division. :laugh:

  • Like 6
Link to post

never really noticed a problem till a couple of weeks ago, went rattin it was a cold night but dry and when i got home and opened me gunbag it was soaking like it had dunked in a puddle:(

good job i checked cos when its late it usually just gets chucked under the stairs :whistling:

the garage is for the car rez :thumbs:

atb si

  • Like 1
Link to post

As long as you clean it thoroughly give a couple of pull through and one with a light it'll be okay, if you can leave it out to air for a few hours it'll be sorted. If you're going to be going out when you know it's going to really cold and wet just give it a really light oil and prep for firing. I'm not sure if you can get it at gun shops etc but when I've shot in really cold climates like Norway you can use a special oil that won't freeze and will still protect the weapon to fire

  • Like 2
Link to post

Take mine out the bag and give it a quick wipe over with old tea towel then place it on the bench and put another old tea towel over the rifle and let stand until the next morning then oil it up action and stock

 

jobs a good un

 

atvbmac :thumbs: :thumbs: :thumbs:

  • Like 1
Link to post

In the garage Rez...........................................BAD LAD

 

I basically don't take the guns out if it is raining so not an issue but if they become wet while out, wipe off excess before putting back in the sleeve until I get home. When home, I take the stock off and allow to dry at room temperature near a radiator with the action open after taking surplus off with kitchen roll. Why take the stock off, many years ago, I had water get into a shotgun action causing rust so now I don't take the chance and you just don't know how much moisture there is between the stock and metal . An air rifle is far worse that a shotty for moisture ingress around the stock where it touches the metal.

 

Always place opened sleeves on the radiator to dry off as well.

 

A bit over the top you may say, well you will not find any rust on any gun of mine.

 

Phil

  • Like 1
Link to post

Cheers fellas. Yeah just habit really. Normally wipe down with WD40, in there slips and away. But I guess last night was super cold. There in doors now, stripped and in the wardrobe :)

 

Until she finds out. Course.

Link to post

I have always reached for my shot guns in the wet months for the game shooting opportunities, easy dismantle and clean of my shot guns plus my dog is working the fields hard in the freezing cold.

 

One thing has just struck me though,- will the dismantling of an air rifle effect it`s zero when reassembled ?

 

 

 

atb

Link to post

I have always reached for my shot guns in the wet months for the game shooting opportunities, easy dismantle and clean of my shot guns plus my dog is working the fields hard in the freezing cold.

 

One thing has just struck me though,- will the dismantling of an air rifle effect it`s zero when reassembled ?

 

 

 

atb

Depends on the scope Mark, if it gets a bump or knock in the process. Some will need a click or two to get the reticle back into zero.

 

I've got a couple of beautiful old scopes I still have in use; a Bushnell Scopechief on my Regal PCP and a NIkko Stirling Goldcrown on my HW77 .22 that have yet to be re-zeroed despite being taken out of the actions and refitted.

 

Every Hawke scope I've had, has needed a re-zero after use and dismantle/refitting of the actions they sat on.

Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...