ftm 3,357 Posted November 13, 2016 Report Share Posted November 13, 2016 ok lads I have a photon with t20 ir on it --will a bigger ir make much difference to clarity of picture or is that down to camera lense inside unit? think that's what I mean Quote Link to post Share on other sites
stuartpengs 19 Posted November 13, 2016 Report Share Posted November 13, 2016 Better illumination tends to result in less pixellation up to a point, but it does become a case of diminishing returns after a while. I'd say you could certainly improve the image given with the T20 by using a relatively cheap sunnranger (t38 with a yokon 3x42 lens screwed on the front). There's a vid on how to make one on the Drone Pro Facebook page. 1 Quote Link to post Share on other sites
Tremo 138 Posted November 13, 2016 Report Share Posted November 13, 2016 ftm - it all depends on what distance you want to shoot with your Photon. Have a look at some of the vids that I have put on Youtube (Danny Boy - Photon XTreme). I find the image clarity to better with more IR, however 'whiteout' happen when the IR it too high at closer distances. My illuminator is on full blast whenever I switch it on though. I simply control the amount of IR that gets through to the Photon's sensor. Obviously though the sensor does have it's limitations, hence it is difficult to get clearer images at the longer distances. 1 Quote Link to post Share on other sites
ftm 3,357 Posted November 13, 2016 Author Report Share Posted November 13, 2016 how do you control the amount of ir ? is it a case of turning front of ir torch ? thanks for this advice lads Quote Link to post Share on other sites
pav 481 Posted November 13, 2016 Report Share Posted November 13, 2016 Turn front of torch it will go from spot to flood Quote Link to post Share on other sites
Tremo 138 Posted November 13, 2016 Report Share Posted November 13, 2016 It depends on the illuminator. Some you can vary the intensity from the back (e.g. newer model NM's, 3 mode T series), others you have to control by going from spot to flood as Pav says. I use an older model NM800 which requires the rotating of the head to go from spot to flood, but I do not control the intensity this way. I have modified my Photon though to use a camera lens instead of the original Yukon lens. I use the aperture in the camera lens to increase or reduce the light that I require for each of my shots. My NM is always on full, spot beam. Quote Link to post Share on other sites
mel b 2,383 Posted November 13, 2016 Report Share Posted November 13, 2016 i changed from a t20 to a t50 and it improved things quite dramatically . 1 Quote Link to post Share on other sites
wilbur foxhound 480 Posted November 14, 2016 Report Share Posted November 14, 2016 i bought a t67 and its too powerfull,i can see foxes out to 400m easily in grass feilds and its very tempting to have a go at them 1 Quote Link to post Share on other sites
Lamp_Shy 21 Posted November 15, 2016 Report Share Posted November 15, 2016 I have a T50 and a new NM800 that's adjustable. The difference between the 2 units is dramatic. With the NM800 I can see out to silly distances on the the Photon. with it being adjustable, you can fine tune the illumination to avoid white outs. I won't use anything else now. 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.