MAIN MAN 277 Posted September 11, 2016 Report Share Posted September 11, 2016 Right, i bought a ford ranger 04 it only had one key so went yesterday to get another cut! i nearly fell over when the fella told me it would take two hours and would cost 170 pounds, anyone els had to get one cut? Quote Link to post Share on other sites
ratattack 111 Posted September 11, 2016 Report Share Posted September 11, 2016 That would be including the chip and programming I would hope. Quote Link to post Share on other sites
MAIN MAN 277 Posted September 11, 2016 Author Report Share Posted September 11, 2016 yes mate, i didnt realize it had to be chiped but still loads for a key Quote Link to post Share on other sites
JDHUNTING 1,817 Posted September 11, 2016 Report Share Posted September 11, 2016 Can get stuff like that off eBay I think Quote Link to post Share on other sites
neil82 1,080 Posted September 11, 2016 Report Share Posted September 11, 2016 Can get stuff like that off eBay I think you might be able to buy a key from the bay but it will still need coding to your truck, not sure about 2004 trucks but earlier ones (2002 models) needed 3 keys to work through the programming of the immo chips, bite the (expensive) bullet and go to a dealer, if they are decent you'll be OK, if not your going to get assbucked big style Quote Link to post Share on other sites
nothernlite 18,089 Posted September 12, 2016 Report Share Posted September 12, 2016 Get it cheaper elsewhere where mate Quote Link to post Share on other sites
mad4it 695 Posted September 12, 2016 Report Share Posted September 12, 2016 if you think that expensive you should try the key fob which you can only get a the main dealers £380 +vat I bought one of ebay and paid £30 to have it reprogamed to my truck. Quote Link to post Share on other sites
MAIN MAN 277 Posted September 12, 2016 Author Report Share Posted September 12, 2016 cheers for the replies, i have found some on ebay they will come to your house and do the cutting and chipping all at the same time for around 100 Quote Link to post Share on other sites
Greyman 28,819 Posted September 12, 2016 Report Share Posted September 12, 2016 cheers for the replies, i have found some on ebay they will come to your house and do the cutting and chipping all at the same time for around 100 lesson for the future, always ask for the master key when you purchase a motor it's normally a different colour and carry,s all the chip information, Quote Link to post Share on other sites
onion jonny 527 Posted September 12, 2016 Report Share Posted September 12, 2016 just make sure you dont lose the fecking thing. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.