Slippery Concrete

[walshie 2,804]

My lad has quite a large area of concrete right outside his door and for the most time it's fine, but when it rains it's slippery as ice. Jetwashing it solves the problem for a few weeks but it's a drag to have to keep doing it.

 

Is there something you can put on concrete to stop it getting slippery, like a coating or something?

[Welsh_red 4,645]

Someone put something on here before for cleaning stuff like that. Think its used by farmers . Will try find it now

[Welsh_red 4,645]

http://www.evansvano...064nev-r064sev/

 

That might work . King sent me the link

[wilbur foxhound 480]

once power washed put on some deadly nightshade,that should do the trick

[BIGLURKS 874]

You can get it cut mate there is a machine that cuts grooves in to the concrete we used too use one on the farm too stop the cows slipping on concrete

[Welsh_red 4,645]

Rent a wall chaser from somewhere

[Greyman 28,440]

Try a square meter first, but I would go with a mix of sbr liquid, Biddeford sand and cement slurry, mix it up like pi55 and pour it on and push it round with a brush, won't cost much more than £40 tops so not a great loss if it don't last but I think it will if you get the mix right

[Guest Navek]

Mix a load of sealing sand ( stuff you put on after block pathing) with concreat barge floor paint mask off a pathway and slap it on.. Mite need doing once a year or two years depending on how much it gets used

[j j m 6,539]

i use deadly night shade after power washing it

[steve55 1]

Sprinkler some sand on it? Depends how long it lasts before washing off though.

[Giro 2,648]

Hyperclorite in a watering can..

 

You won't even have to pressure wash it..