Tornado1979 145 Posted July 24, 2016 Report Share Posted July 24, 2016 Friday my Primos Tripod trigger stick stopped working, they we're jamming and the trigger wasn't working, making the stick unusable, after using for a year I've become very attached to them so replacing wasn't an option.Today I stripped them down, and I'm happy to say they're now back in action and like new Thought i'd share the simple steps to take to repair just in case anyone else is having same problem. Step 1 Remove the screw with Alan key wrench from bottom of the trigger handle Step 2 Adjust the bolt, lowering the pin, the pin presses onto top of legs releasing the legs, for some reason it's worked it's self loose and wasn't putting enough pressure to lower or raise the legs, seems to be a common problem. Step 3 Check the trigger is working and close back together. *** I watched a video of a gentleman on youtube putting BB's into the hole so the pin hit the BB's, not quiet sure why you would do this when you can simply adjust the trigger ** This is top of legs when stripped, you'll not need to strip to fix this problem, but thought id share also. 1 Quote Link to post Share on other sites
seatrout 8 Posted July 25, 2016 Report Share Posted July 25, 2016 Hi Nice one, hope I never have to repair mine. Jim Quote Link to post Share on other sites
mark williams 7,550 Posted July 26, 2016 Report Share Posted July 26, 2016 Primos are an absolute must have especially with a two point rest. Good on you T for fixing your Primos. atb 1 Quote Link to post Share on other sites
Metalman2 45 Posted August 28, 2016 Report Share Posted August 28, 2016 Had my Primos tripod for a while, an absolute must now Quote Link to post Share on other sites
martyn2233 2,491 Posted August 29, 2016 Report Share Posted August 29, 2016 Had my Primos tripod for a while, an absolute must now+1 Quote Link to post Share on other sites
Mine2209 1 Posted November 2, 2017 Report Share Posted November 2, 2017 Hi all, I've just had to fix the legs on mine, they had stopped locking, made a video on youtube of how to do it to help folks, hope its of use. Repairing Primos sticks - YouTube https://www.youtube.com/watch?v=y4dTjuZ08Vs Cheers 1 Quote Link to post Share on other sites
BRY 79 Posted November 9, 2017 Report Share Posted November 9, 2017 (edited) My bipod primos have stopped working. , load of shit . Got a cheapie tripod set use it alot no probs Edited November 9, 2017 by BRY Quote Link to post Share on other sites
philpot 4,969 Posted November 10, 2017 Report Share Posted November 10, 2017 I use my trigger sticks at least once a week but usually several times a week and have done for the past 18 months, superb product. Thank you for the repair info and keeping my fingers crossed that I don't need to do it. Phil Quote Link to post Share on other sites
mr rooney 5 Posted January 9, 2018 Report Share Posted January 9, 2018 Just ordered the gen 3 version . Good to know DIY service is possible ( just like my HW100) and as mentioned an indispensable aid to help you enjoy your shooting imho . Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.