Any Ideas What Mk This Is

[doyley 116]

Here we go lads

 

 

 

[barrywhite 282]

i would say a mark 3 action in a mark 2 stock

[Jonjon79 13,358]

Yep, that's an early Mk3

 

I still don't know if Macs Prosport bits will fit in it though.

 

It might come good from a strip and a good clean up, new piston seal and regrease.

 

Good luck

[doyley 116]

Cheers lads I'm going to strip it Down tonight I'll take some pics and put them up for you guys to see what you recon

[bigmac 97kt 13,806]

Cheers lads I'm going to strip it Down tonight I'll take some pics and put them up for you guys to see what you recon

pm me your addy and post code and ill send down the top hat and washers any way

 

cant do any harm

 

atvbmac :thumbs:

[doyley 116]

Cheers lads big mac ill pa you my address thanks very much

[bigmac 97kt 13,806]

Cheers lads big mac ill pa you my address thanks very much

Ill send down the spring as well

 

or you could just bang the whole lot in the post and ill do the refurb for you

 

then ill pm you and you can arrange for it to be picked back up when its done lol

 

atvbmac :thumbs:

[Rez 4,961]

Quite a find that.

[doyley 116]

This is what the inside looks like

 

 

 

[bigmac 97kt 13,806]

Right you need the piston seal as yours is fecked

 

i see you have the top hat

 

the spring has been butchered

 

 

SO ILL SEND THE SPRING,,, PISTON,,, WITH THE SEAL ALL READY FITTED JUST TRY THE PISTON IN YOUR TUBE IF IT DOSE NOT FIT JUST PUT THE SEAL ON YOURS

 

BUT THEY LOOK THE SAME SI

 

AND ILL SEND THE PROPER GREASE WRAPPED IN SOME CLING FILM FOR YOU AS WELL

 

IF YOU WOULD LIKE THE TOP HAT I HAVE LET ME KNOW

 

FECK IT ILL SEND THAT AS WELL BUD

 

ILL CLEAN AND POLISH THEM FOR YOU BEFORE I SEND THEM DOWN ALL YOU WILL NEED TO DO IS PUT THE GREASE ON

 

BEFORE YOU FIT THEM

 

ATVBMAC :thumbs:

[Jonjon79 13,358]

To be fair, a lot of that is looking pretty good. Like Mac says, the piston seal is knackered and, the spring doesn't look too clever. I reckon You'll have that running nicely in no time

 

The cosmetic bits on the action and stock will take time. Be patient and enjoy it, that thing will be a keeper

Edited July 17, 2016 by Jonjon79

[Jonjon79 13,358]

Oops, I looked again today - I can see now that it's a childs hand. Sorry Doyley.

 

Last night when I looked at the pic, it looked the hand wasn't attached to anything

Edited July 18, 2016 by Jonjon79

[jmilam08 193]

Strip the baby leave it cold, theses internals need cleaning!!

[bigmac 97kt 13,806]

All wrapped up for you Jamie

 

top hat and washers

 

piston with the seals

 

spring

 

grease

 

ill try and get it off today but if not defo tomorrow

 

that will have saved you a few quid any way

 

atvbmac :thumbs:

[jonnie bravo 572]

Jimmy your a true gent that's a very good gesture and should be just what he needs to get her back to full health