Leaking Regulator

[Lewissc 48]

Hi guys I've noticed a leak coming from my regulator today, I've only had it a few weeks so can't tell you how f**ked off I am. I've attached a pic to show where the leak is coming from, it's coming from inbetween that brass bit and the black block. Anyone know if it's an easy fix or will I have to send it back? Many thanks

[si brown 8,486]

looks like your gonna have to strip a few bits of to get at it and they will all have seals!

if you bought it new.. id say get shop to sort it cos they'll say you've fecked it and void your warranty!!!

there good like that

atb si

[villaman 9,983]

Take it back and get a NEW GUN

[Lewissc 48]

Thanks guys I got it from the airgun centre so I'll be on the phone to them in the morning

[Durham John 693]

Nothing to do with over filling it then?

[Lewissc 48]

Might have been John not sure though. Managed to sort it out anyway lads. There's a video on YouTube by xtx air showing how to service an r10 regulator block, took it apart and the o rings seemed quite dry and the brass bit that was leaking seemed too tight...anyway I lubed the o rings and tightened everything up as Darrin did on the video and the leak has stopped so happy days

[Durham John 693]

cannot beat a bit of lube round your ring mate lol

 

 

sorry mate couldnt resist

[Lewissc 48]

The misses loves it haha

[airtech 39]

its a easy fix. you first need take the brass bottle adaptor off there is a o ring on that part too. once thats off just unscrew the brass bolt there is a small bearing in there so dont loose it. with both parts off the rifle you may as well change both seals. just make sure you put the cut out on the plastic washer in the correct place when assembling it back on the rifle