Kieransingo 256 Posted July 6, 2016 Report Share Posted July 6, 2016 Anyone got any tips what thickness would be best for a natural ash U catty? An how would I go about applying it same as tube or would it be different? Cheers Quote Link to post Share on other sites
Greyman 29,749 Posted July 6, 2016 Report Share Posted July 6, 2016 (edited) Anyone got any tips what thickness would be best for a natural ash U catty? An how would I go about applying it same as tube or would it be different? Cheers I normally cut mine 30mm straight, for hunting with bigger ammo or 25/15mm taper for 10mm bb,s when shooting targets and the odd pigeon, regarding attachment I use the wrap and tuck method, there are loads of tutorials on YouTube showing how to do it, I,ve just started attaching my pouch,s with a bit of 4mm tube it works well and seems to last longer than when wrapped I've stuck a pic on hope you can see it, just stuck a couple more on hope you can see, you need to form a groove around the top of the fork,a round file is best, then wrap around the groove Edited July 6, 2016 by Greyman 1 Quote Link to post Share on other sites
jonnie bravo 572 Posted July 6, 2016 Report Share Posted July 6, 2016 Quality idea that greyman. 25mm or 30mm straight will last well and have good power for 9.5mm steel, hex and lead under 10mm, just make sure the length suits your draw. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.