GruffaloGriff 1,859 Posted June 27, 2016 Report Share Posted June 27, 2016 Got asked to make some replacement parts for a cannon enthusiast, didn't take a lot of pics but here is one of the height adjuster wedge, also made the other timber parts except the side stepped pieces are original. It is the smallest one furthest away. All parts made from Iroko, be glad to get it used, horrible dust when you work it. 5 Quote Link to post Share on other sites
Tiercel 6,986 Posted June 27, 2016 Report Share Posted June 27, 2016 Iroko, is a bugger to work with and the dust gets everywhere. Nice looking though when oiled. TC 1 Quote Link to post Share on other sites
Mister Gain 1,764 Posted June 27, 2016 Report Share Posted June 27, 2016 Got to agree about the dust when working with iroko, I find it really aggressive if it gets past the face mask, also, the silica content can sometimes be really high and you can actually see the sparks when running it through the table-saw or band-saw and dulls the teeth really quickly, but yes, looks lovely when oiled. 1 Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.