stealthy1 3,964 Posted June 21, 2016 Report Share Posted June 21, 2016 It will shoot high now with the shim, but you should have a lot of clicks down now, and some to spare. 1 Quote Link to post
Underdog 2,337 Posted June 21, 2016 Report Share Posted June 21, 2016 It will shoot high now with the shim, but you should have a lot of clicks down now, and some to spare. Raising the front of the scope will lower impact bud. The barrel is bent up or the scope was bent down. Bend the appropriate one back. Easy. 1 Quote Link to post
Little Butch 16 Posted June 21, 2016 Author Report Share Posted June 21, 2016 I bloody hope so! I almost treated myself to a Pcp there and then when the scope bolt rounded off! Quote Link to post
Little Butch 16 Posted June 21, 2016 Author Report Share Posted June 21, 2016 Riiiiight, one shim in and a bit of adjusting.. I'm closer... But not quite there! Rough measurements but I'm shooting from about 20/25 yards out and even wound right out on the elevation I'm still having to aim 3/4 of an inch lower. Not getting bad results from my drawn up targets though Quote Link to post
stealthy1 3,964 Posted June 21, 2016 Report Share Posted June 21, 2016 Just buy a HW100. Sorted. Quote Link to post
Little Butch 16 Posted June 21, 2016 Author Report Share Posted June 21, 2016 Maybe once in a month or so. Liking the look of BSA Ultras... Quote Link to post
barrywhite 282 Posted June 21, 2016 Report Share Posted June 21, 2016 if you are rounding nuts and having a hard time with a scope a pcp my not be a good idea just yet . a real tough springer untill you get the hang of it might be best . your next thing if you get this right is scope creep Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.