bigmac 97kt 13,796 Posted June 16, 2016 Author Report Share Posted June 16, 2016 Barrel not to botherd about this as the shroud covers it any way and the shroud is still at the rfd,s so i will have to do that later to day atvbmac :thumbs: 2 Quote Link to post
just-A-snap 1,269 Posted June 16, 2016 Report Share Posted June 16, 2016 Yes mac, OK mac, Sure mac. You will do a good job on it because you do not know any other way, that is the best you can and not that will have to do. Well that is what I think. All the best 1 Quote Link to post
jonnie bravo 572 Posted June 16, 2016 Report Share Posted June 16, 2016 Nice one jimmy. Not sure what I'm looking forward to more seeing the finished article or seeing what she is capable of 1 Quote Link to post
stealthy1 3,964 Posted June 16, 2016 Report Share Posted June 16, 2016 If the blueing turns out crap, just do it again. 1 Quote Link to post
bigmac 97kt 13,796 Posted June 16, 2016 Author Report Share Posted June 16, 2016 If the blueing turns out crap, just do it again. Im not happy with it stealthy but then im not sure how its supposed to look when you put it on lol some of the pitting is deep and would have to be machined off and thats some thing i do not have but will go along with the old,,,,new look that i have in mind for her and i was going to strip every thing off her until i was told that the trigger is a bitch to take off and that it would take ages to put back together thats a job for Vizlauk(Sean) lol I need to re do the side leaver as iv just seen a rust spot on her as you will see in the photos im just going to leave the blueing until tomorrow now and crack back on with the stock but i am happy with the way she is coming along any way the fecking stock has been the hardest part bileave it or not lol it had some sort of sealer on under the factory stain and its been a bitch to get off but iv done it now the smoothing off begins lol atvbmac :thumbs: 4 Quote Link to post
tomburras 2,730 Posted June 16, 2016 Report Share Posted June 16, 2016 Trigger is easy to take off but if you strip the trigger unit its fiddly to put back together. Just found this..... http://www.pyramydair.com/schematics/rwsmodel48-52-54-t05trigger.asp Wish I had this when I stripped mine, it was hard to suss how it went back together after the springs and bits pinged out of it without a diagram. Should be easy with this to follow. Quote Link to post
si brown 8,486 Posted June 16, 2016 Report Share Posted June 16, 2016 Trigger is easy to take off but if you strip the trigger unit its fiddly to put back together. Just found this..... http://www.pyramydair.com/schematics/rwsmodel48-52-54-t05trigger.asp Wish I had this when I stripped mine, it was hard to suss how it went back together after the springs and bits pinged out of it without a diagram. Should be easy with this to follow. nice one tom there like a Chinese puzzle if you can't remember what you've done i take a photos on my phone after a right nightmare last year atb si 1 Quote Link to post
tomburras 2,730 Posted June 16, 2016 Report Share Posted June 16, 2016 Trigger is easy to take off but if you strip the trigger unit its fiddly to put back together. Just found this..... http://www.pyramydair.com/schematics/rwsmodel48-52-54-t05trigger.asp Wish I had this when I stripped mine, it was hard to suss how it went back together after the springs and bits pinged out of it without a diagram. Should be easy with this to follow. nice one tomthere like a Chinese puzzle if you can't remember what you've done i take a photos on my phone after a right nightmare last year atb si The the springs flew out and had to go looking round the kitchen floor along with the other bits. Found all sorts of other stuff on the floor from other projects too it was a nightmare! 1 Quote Link to post
bigmac 97kt 13,796 Posted June 17, 2016 Author Report Share Posted June 17, 2016 Well the blueing is just about done i was not happy with parts of it but iv sorted them out now and im a lot happier now just got to pick the shroud up then put all the mettle work back together the blueing is not a factory finish but its my first time doing it the photos give it a silvery finish but its not lol just got to polish and re grease the internals Then i can get back to what i do best the STOCK atvbmac :thumbs: 3 Quote Link to post
bigmac 97kt 13,796 Posted June 17, 2016 Author Report Share Posted June 17, 2016 Like my bro Vizlauk all ways says TAKE YOUR TIME AND IT WILL BE RIGHT well once again he is right just get a look at the blueing now :boogie: PHEW 3 Quote Link to post
bigmac 97kt 13,796 Posted June 17, 2016 Author Report Share Posted June 17, 2016 MORE 1 Quote Link to post
bigmac 97kt 13,796 Posted June 17, 2016 Author Report Share Posted June 17, 2016 two more 2 Quote Link to post
just-A-snap 1,269 Posted June 17, 2016 Report Share Posted June 17, 2016 Looking good is not a good enough phrase mac. All the best Quote Link to post
toby63 1,236 Posted June 17, 2016 Report Share Posted June 17, 2016 looking very good mate ? Quote Link to post
si brown 8,486 Posted June 17, 2016 Report Share Posted June 17, 2016 It's looking fu@king ace!!! It was well battered when I put it in the post last week.... Top workmanship Jimmy Who ever wins this is in for a right treat:) Atb si Ps. And your in for a free session Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.