philpot 4,990 Posted May 31, 2016 Report Share Posted May 31, 2016 Each rifle wil Okay Nicepix, I accept your point on weight but please also accept my point taken from my leaflet and AA website under 'downloads' so it seems that they are not so certain me thinks. This photo is from my leaflet as I cannot seem to be able to copy the online brochure but here is the link, page 33 http://www.air-arms.co.uk/wp-content/uploads/AA-Brochure-ISS-7-High-Res.pdf At the end of the day both rifles are superb and in some ways I wish I had bought the Prosport but quite simply on the day the TX200HC felt better for me and that is what I made my decision on along with the direction the salesmen were guiding me, in truth, now that I am slowly getting to grips with the springer, she is a very nice piece of kit but I will say, the pellet feed is not so easy as an HW97 however like the results, I am getting into the feel of it. I wish you well with your Prosport matey and I will also enjoy my TX, good shooting. Phil The actual weights may vary dependent on the density of the wood in the stock. But in reality both rifles are so close in weight that it would not matter. Certainly not enough to warrant discounting one or the other IMO. However, they have a different point of balance and so the shooter might think that one or the other is heavier when in fact it is the balance not the weight that gives that effect. On power; they are virtually the same rifle. So given that both have the same spring, cylinder, etc it would be a pretty good trick for Air Arms to de-tune the Pro Sport and not the TX using the same parts. On that point I bow to the manufacturer's specification as 'close to the legal limit' which would indicate that it isn't 10.5 ft-lb as some believe. Also, given that they use the same spring, etc the only way the Pro Sport could suffer from power loss is if a small batch of inferior parts was unsuspectingly used on that production line and not on the TX line. It certainly isn't in Air Arm's interests to have their flagship springer under powered or unreliable. Would I pay £100 more for a Pro Sport than a TX brand new? I don't know. But if there were two in the shop at the same price I would walk out with the Pro Sport every time, That is only my personal opinion. I am sure that someone else would be happy with the TX I left behind. Oh please understand, I have no idea how or why there could be a power drop and as a complete numpty when it comes to springers, They seemed to be fully aware of this and I just repeat parrot fashion what we were told. It makes little or no sense to me either. Time for a gin and tonic so I will leave it at that nicepix. Phil 2 Quote Link to post
Rez 4,961 Posted May 31, 2016 Report Share Posted May 31, 2016 Im not even sure what the chats about now Pro Sports are mint, dunno why we're all bitchin' 1 Quote Link to post
stealthy1 3,964 Posted June 1, 2016 Report Share Posted June 1, 2016 Nowt on telly again. 1 Quote Link to post
Lloyd90 509 Posted June 1, 2016 Report Share Posted June 1, 2016 Feck sake, so which is better - pro sport , TX or a Hw97 ? Lol 1 Quote Link to post
jonnie bravo 572 Posted June 1, 2016 Report Share Posted June 1, 2016 Walther lgv every time 1 Quote Link to post
Nicepix 5,650 Posted June 1, 2016 Report Share Posted June 1, 2016 Walther lgv every time Not a patch on the Crosman 1077 1 Quote Link to post
eastcoast 4,122 Posted June 1, 2016 Author Report Share Posted June 1, 2016 The original question was regarding a possible weakness in the Pro Sport's cocking lever. The fact that people are arguing the pros and cons of Pro v TX but not using the cocking arm as leverage ( puns intended ) in their argument suggests to me that there's nowt wrong in that area of the rifle under consideration ? I have enjoyed reading this though and thanks to the people who have posted. But...should I get a .22 or a .177 ? : - ) Quote Link to post
bigmac 97kt 13,787 Posted June 1, 2016 Report Share Posted June 1, 2016 Walther lgv every time Not a patch on the Crosman 1077 SMK of any cal OK ILL GET MY COAT atvbmac :thumbs: Quote Link to post
Nicepix 5,650 Posted June 1, 2016 Report Share Posted June 1, 2016 The original question was regarding a possible weakness in the Pro Sport's cocking lever. The fact that people are arguing the pros and cons of Pro v TX but not using the cocking arm as leverage ( puns intended ) in their argument suggests to me that there's nowt wrong in that area of the rifle under consideration ? I have enjoyed reading this though and thanks to the people who have posted. But...should I get a .22 or a .177 ? : - ) The cocking lever is fine as long as you leave it alone, or know what you are doing if you don't leave it alone. The problem comes if you strip the rifle and don't put it back quite right. Putting too many washers in or too long a top hat can cause problems where the rifle cocks but the cocking lever doesn't click back in its right place. Quote Link to post
stealthy1 3,964 Posted June 4, 2016 Report Share Posted June 4, 2016 So the Prosport is the best then? Quote Link to post
philpot 4,990 Posted June 4, 2016 Report Share Posted June 4, 2016 Not a sound came from the North Lincolnshire coast......................................................................................... Phil 1 Quote Link to post
Nicepix 5,650 Posted June 4, 2016 Report Share Posted June 4, 2016 So the Prosport is the best then? It represents the next step up from the TX200 (Their words not mine) 1 Quote Link to post
mark williams 7,552 Posted June 4, 2016 Report Share Posted June 4, 2016 Rubbish ! 2 Quote Link to post
mattwhite 1,993 Posted June 4, 2016 Report Share Posted June 4, 2016 Rubbish ! And the Lord said........"do not get drawn in again my son.....although, your already going to burn in a lifetime of torment so bugger it, go for it kid!" 1 Quote Link to post
WoodsmanJim 160 Posted June 6, 2016 Report Share Posted June 6, 2016 Hi Lloyd, it's James. Good to make contact just now, I'll research the postage costs and get back to you asap. Cheers mate. James Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.