Trigger On Body Grips

[shropshire mole 190]

Is it possible to renew the trigger/ trigger wires on body grips?

 

Have 2 traps which are ok except where one of the trigger wires has rusted and broken. Rather than bin and buy again would like to replace the trigger.

 

Looks like I can drill out the old rivets, replace the trigger wires and bolt together.

 

Any one tried this? Does it work?

[moxy 617]

Yes and yes

[Thequietman 3]

I drilled the rivets out used some thick stainless wire and re riveted should last good couple years now.

[J Darcy 5,871]

Yes, easy to do..... :thumbs:

[Wolfdog91 6,926]

I must ask ; have y'all started using CONI pans over there ?

[Phil Lloyd 10,738]

Yep..

[Wolfdog91 6,926]

What's the largest Conibears y'all can use over there ? A 5x5 with a coin pan would seem to be perfect !

[EDDIE B 3,162]

What's the largest Conibears y'all can use over there ? A 5x5 with a coin pan would seem to be perfect !

4~1/2 X 4~1/2 is as good as it gets I'm afraid. BMI 116 is a very popular trap over this side of the waters.

[EDDIE B 3,162]

I must ask ; have y'all started using CONI pans over there ?

Question for you Wolfdog91, and sorry for hijacking this thread, but does anyone in the US supply Sauvageau trap pans? Haven't found anywhere, and i hear good things about them.

[Wolfdog91 6,926]

I know of Barker pans but I didn't know savageau made pans. I'll ask on trapperman.