1St Outing With The Hw100T

[j j m 6,561]

well done mate

[mattwhite 1,993]

Cheers jjm

[Lloyd57 98]

Excellent shooting Matt.

Regards

Lloyd

[mattwhite 1,993]

Thanks pal

[Durham John 693]

Good shooting Matt

And some good ranges as well.

[David.evans 5,323]

Matt

Not been funny mate , but if you zero at 40 yards in 177

The half mill dots should work out 5 yard increments, on 8.5 mag with jsb's 10.4 , don't know what your using ( 8.4 ) ?

And a fps about 710/720

Give it a go if you want , it might make it a bit easer , only saying like mate

Atb

Dave

[mattwhite 1,993]

Good shooting Matt

And some good ranges as well.

thanks John

[mattwhite 1,993]

Matt

Not been funny mate , but if you zero at 40 yards in 177

The half mill dots should work out 5 yard increments, on 8.5 mag with jsb's 10.4 , don't know what your using ( 8.4 ) ?

And a fps about 710/720

Give it a go if you want , it might make it a bit easer , only saying like mate

Atb

Dave

Cheers Dave, I will try that out. At the moment I'm zeroed at 25 so I only need hold OVER but that makes sense mate thank you.

[David.evans 5,323]

Matt

23yards out to 35 , is 1/2 mill dot under .will it is on mine anyway !

Atb

[toby63 1,236]

Matt

Not been funny mate , but if you zero at 40 yards in 177

The half mill dots should work out 5 yard increments, on 8.5 mag with jsb's 10.4 , don't know what your using ( 8.4 ) ?

And a fps about 710/720

Give it a go if you want , it might make it a bit easer , only saying like mate

Atb

Dave

that all depends if its pushing out the same power as yours if not it will be different ?only saying like ✌️

[David.evans 5,323]

Yea your right Toby , only one way to find out , chrono

Atb

[mattwhite 1,993]

Yes I should crony it as I'm on 8.4grn exacts. That's the next project!

[mark williams 7,561]

Matt,

 

Zero your HW 100 to strike a match head at bang on 38/39 yards or 35 mtrs if you will.

Your .177 pellet will fly within a 1 inch flight path (kill zone) from 9.7 yards out to 38.3 yards using an average 8.4 grain pellet, (no hold under or hold over) within this range.

Calibrate your rifle over further distances with half mill dots if you need more distance.

 

 

Hope it helps any.

[David.evans 5,323]

Matts going to get confused mark , you say 39 I say 40 , what the fecin diffrence, I know 1 yard !

Fukin perfectionist that's what you are , lol

Any way Toby's right , all depends on the fps , and point of impact at range

Atb

You twat

[mattwhite 1,993]

It all helps lads.....its good to keep learning and I will give a few of your methods a try.