Good 1X19 Cable?

[perthshire keeper 1,239]

intresting stuff gents! so will the charges some how be cheaper is its sent from a private residence rather than a shop?

[EDDIE B 3,166]

intresting stuff gents! so will the charges some how be cheaper is its sent from a private residence rather than a shop?

Their just a couple of ways of avoiding customs charges!

[Digby 5]

Hello PK,

 

Have you tried www.s3i.co.uk?

 

They have a large selection of wire cables,differing sizes and flexibilities, plus ferrules, crimping tools etc.

I bought cables, ferrules and an Ormiston crimping tool from them, to make ground anchors etc.

They are good to deal with too.

ATB,

Digby.

[Bunny Digger 21]

Hello PK,

 

Have you tried www.s3i.co.uk?

 

They have a large selection of wire cables,differing sizes and flexibilities, plus ferrules, crimping tools etc.

I bought cables, ferrules and an Ormiston crimping tool from them, to make ground anchors etc.

They are good to deal with too.

ATB,

Digby.

Is stainless steel ok or do we need the aircraft cable, s3i.co.uk, 1x19 s/s cable is 3/64 in which Imo should be good for Mink

[Digby 5]

I bought the 316 marine grade 1 x 19 s/s cable, it was perfect for my use.

I think that S3i will sell a 1 metre length, so it's cheap enough to buy a short length to see if it's suits your purpose?

Their video explains the stiffness of each cable.

[CHEVINFOX 3,537]

have a look on here http://www.handystraps.co.uk/ s3i is good to deal with

[J Darcy 5,871]

have a look on here http://www.handystraps.co.uk/ s3i is good to deal with

I bet that cable won't take loading too well...

[CHEVINFOX 3,537]

witch ? all i said was have a look

Edited December 25, 2015 by CHEVINFOX

[Bunny Digger 21]

I had a look & they only go down to 2mm, I need 1mm, J darcy do you think the 1x19 x 3/16 from s3i will load Cheers for all the input

[3175darren 1,100]

Has anyone tried looking in a chandlers/ sailing supplies, they have wire for the mast rigging, I know it sounds stupid but with a ask, they may be able to source what you are looking for?

[CHEVINFOX 3,537]

I had a look & they only go down to 2mm, I need 1mm, J darcy do you think the 1x19 x 3/16 from s3i will load Cheers for all the input

they do 1mm in galvanised but not 1x19

[J Darcy 5,871]

I had a look & they only go down to 2mm, I need 1mm, J darcy do you think the 1x19 x 3/16 from s3i will load Cheers for all the input

I would say so...

 

1mm is very thin....

[perthshire keeper 1,239]

gents ive found the answer! haha their us a uk suppier (with a good snaring knowlage!) who has very good 1 1/6th cable in 1x19 and its very good and very cheap! ive had 2 fox and a mink in It this week honestly ime over the moon and then some with it pm me and ile drop you some contact details and its CHEAP!

[3175darren 1,100]

gents ive found the answer! haha their us a uk suppier (with a good snaring knowlage!) who has very good 1 1/6th cable in 1x19 and its very good and very cheap! ive had 2 fox and a mink in It this week honestly ime over the moon and then some with it pm me and ile drop you some contact details and its CHEAP!

just tried to pm you but your in box must be full?

[perthshire keeper 1,239]

fixed