Presision Engineering (Help)

[David.evans 5,323]

Have any of you lads got the tools to widen out these bolts holes , 10/12 mm each side width ways

And re counter sink ?

Don't mind what it costs , just really need it done by some one who knows the score ?

Its the rail mount for the pulsar , and ihave to shim over the scope , but if this could be done

It would enable me to move the whole scope over maintaining the lazer at 0/0

Atb

Dave

[villaman 9,983]

All you need is drill bits and a drill

[moxy 617]

If you haven't the gear Dave. Send it up and I will pop it in the pillar drill.

[David.evans 5,323]

Nice one moxy

I'll send a pm a bit later

Atb

[stealthy1 3,964]

Can you not use adjustable mounts?

[Zimpara 99]

Yeah pedestal drill would be fine mate. Happy to help if moxy goes AWOL. ;-) but my gut feeling is he lives on here. Lol good lad

[David.evans 5,323]

No mate

It's the base rail for the pulsar 870 the ajustment needs to be left / right for windage , but mantain the lazer at zero range

If this can be done its means I can move the scope left / right , with a bit of fiddling.i have done it by packing out the clamps on the scope to the rail , but not happy with it !

Atb

[Buster321c 1,010]

Nice one moxy

I'll send a pm a bit later

Atb

 

 

100% you`ll get some pants back in with the post ,,,,,,,,,,,,,

l always seem to

[moxy 617]

 

Nice one moxy

I'll send a pm a bit later

Atb

 

 

100% you`ll get some pants back in with the post ,,,,,,,,,,,,,

l always seem to

Have you ever been tempted to give them a sniff.

Bet you've worn them too.......

[Buster321c 1,010]

Bit tight mucka