Joined The Youtube Expert Club Now Im Going In(R10 Reg)

[bugg 84]

Morning all, yes twats included...... Iv bought a huma reg from xtx diy jobbie, youtubed the shit out of it and I'm a pro and its going to be easy.....but if there is anyone who has done it and come up against a problem my 3 hours of top class training may have missed I'd appreciate your advise :-)

[Seamaster 153]

Piece of piss mate. I'd suggest removing the reg cover with a hacksaw though, it's a lot easier than with a Dremel.

 

Chris

[bugg 84]

Just a quick note on the huma reg, set at 76 bar, first run over the chrono was 10.9 50 shots with 4 fps spread,more power wanted so wound the power up on the hammer spring as per Darrin's video and set it 11.6 interestingly the variation increased to 8.7 fps, then done 50 shots to bed it in and make sure it was happy there with no creep all was good average 8.6 fps variation from 232 bar fill, now the problem I have is my s410 in its sweet spot only has 11 fps variation un regged witch didn't need 85 quid spent on top of the price was cheaper and the bloody thing is still more accurate than the r10 is imo (may just be me) BUT xtx is a great company to deal with the videos he sends you for diy fitting are spot on nothing is missed in the videos and he replies to emails in a timely manner so thumbs up for you Darrin

[villaman 9,983]

What pellets are you using ?

[bugg 84]

Jsb jumbo bud

[villaman 9,983]

Reading a few other post on different forums , 8fps seem to be about right for the after market DIY reg

 

Dont forget when Darrin(XTX) fits them he does other stuff to the gun ,my regged ultra runs at 4fps over a fill