David.evans 5,323 Posted December 2, 2015 Report Share Posted December 2, 2015 What's the benefits of a t38/50 over a t 20 , I thought they were very much the same ? Atb Quote Link to post Share on other sites
IanB 0 Posted December 3, 2015 Report Share Posted December 3, 2015 The T38 and T20 will give the same performance there both the same lens size, just the T38 has a smaller torch body. The T50 has a larger lens and is probably the biggest you would want to go in the T range of torches, the T67 is a heavy lump and personally I'd avoid it and but something else if you want even more throw still, i.e an x-searcher or wolf eyes seal, much better imo. Quote Link to post Share on other sites
ukhunter 111 Posted December 4, 2015 Report Share Posted December 4, 2015 if you want even more throw still, i.e an x-searcher or wolf eyes seal, if you need even more light then go for a T74 Quote Link to post Share on other sites
hutchey 147 Posted December 4, 2015 Report Share Posted December 4, 2015 or customise a T38 or T50 with a yukon lens head aka Sunranger Quote Link to post Share on other sites
David.evans 5,323 Posted December 4, 2015 Author Report Share Posted December 4, 2015 Got s link there hutchey Thanks mate Quote Link to post Share on other sites
EVO HUNTSMAN 13 Posted December 6, 2015 Report Share Posted December 6, 2015 (edited) dave, buy a t20 mate and fit a 66mm crelant head on it, its lighter and will out perform the above mentioned have a look at the picture below, the T20 with the 66mm crelant is the bottom torch,the the middle torch is a 501b with T20 head and the 501b is the top torch, the top two torches are more than enough for air rifle ranges and the 66mm crelant will outshine centre fire ranges Edited December 6, 2015 by EVO HUNTSMAN Quote Link to post Share on other sites
maxwell 88 Posted December 7, 2015 Report Share Posted December 7, 2015 What led do you have in the 501b with t20 head Quote Link to post Share on other sites
David.evans 5,323 Posted December 7, 2015 Author Report Share Posted December 7, 2015 Evo Thanks mate , where would I get one of those 66mm heads from ? Atb Dave Quote Link to post Share on other sites
ukhunter 111 Posted December 7, 2015 Report Share Posted December 7, 2015 Evo Thanks mate , where would I get one of those 66mm heads from ? Atb Dave i got one here in my bits box bud Quote Link to post Share on other sites
David.evans 5,323 Posted December 7, 2015 Author Report Share Posted December 7, 2015 Uk Will screw on to the t20 mate , and if so are you selling it ? Atb matec Quote Link to post Share on other sites
Buster321c 1,010 Posted December 7, 2015 Report Share Posted December 7, 2015 Got T20 with doubler here if u wanna try it Dave 1 Quote Link to post Share on other sites
David.evans 5,323 Posted December 8, 2015 Author Report Share Posted December 8, 2015 Sound buster I'll send you a pm mate Atb Quote Link to post Share on other sites
Buster321c 1,010 Posted December 8, 2015 Report Share Posted December 8, 2015 Got nothing pm wise Dave ,,,,,,,,,u still got me number ? just giz a txt mate Quote Link to post Share on other sites
ukhunter 111 Posted December 8, 2015 Report Share Posted December 8, 2015 also got a T20 with doubler here too dave Quote Link to post Share on other sites
EVO HUNTSMAN 13 Posted December 8, 2015 Report Share Posted December 8, 2015 Evo Thanks mate , where would I get one of those 66mm heads from ? Atb Dave hi dave sorry for the delay bud, ludicrous lumons sell them pre built, I did have a spare one new but used it last week to build one of the lads one, the T20 with the doubler lens will certainly improve your distance and is great for rimfire ranges , what you are basically doing by putting a larger aspheric lens on is gathering all the light together from the led and sending it all out in a much tighter spot thus increasing the light into one area Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.