Attaching Pole To Make Quickset

[jackson2kaii8 5]

Well men, how do you guys attach your pole to the net to make a quickset that will stay in place? Any pictures would help??✌?️

[lllluke1 329]

In the pinned post, there is a thread on how to make a quick set net. All info and pics on there

[Fat-Ferret 857]

You want to thread the pole through the mesh on the first and last pole and secure it with tape, Unfortunately I don't have a photo.

 

 

 

On the next however many poles your using, use this knot on either a grommet or straight on the pole, secured with a castration band. Some people don't like the bands but I have never had any problem with them.

 

[jackson2kaii8 5]

Yes I've tried that tie but it's not sturdy enough, I haven't tried it with the castration band, how does that work.? Thanks for your replys

[Tiercel 6,986]

Yes I've tried that tie but it's not sturdy enough, I haven't tried it with the castration band, how does that work.? Thanks for your replys

Put the ring on the pole, use a bit of fairy makes it slip easier, thread a piece of line through the ring, then make your clove hitch above the ring.

 

 

Next pull the ring away from the pole with the string and slide the handle of a spoon between the ring and pole.

 

 

Next turn the spoon around 180 degrees

 

 

Then use the tip of the spoon handle to prise the ring over the top of the pole.

 

 

Pull out the spoon handle and the twine and job done.

 

 

TC

[werbad 43]

I use hair bands you can get them from the pound shop, loop it through the net and topline then on to the pole it work for me, sorry can get pic's up to show you

[Fat-Ferret 857]

I knew Tiercel would be along

[jackson2kaii8 5]

Thanks tiercel for the photos but how do I thread the line through the ring if the line is already attached to the long Net? Sorry might be a stupid question,

[Tiercel 6,986]

FFS I give up.

 

TC

[lifelong cumbrian 1,826]

use clove hitch

 

 

Slip over pole

 

 

 

 

 

 

[jackson2kaii8 5]

Life long you the man

[breeze 1,293]

Good stuff with the pics gents

 

I do exactly the same but I use hoops cut from a bike inner tube

[coneykenny 98]

Followed that method way back and very handy.

[Phil Lloyd 10,738]

We started off with the rubber bands, cut from tyres, then progressed to the castration rings,..had great success with both methods of securing the head and foot lines,...then,..we changed over to using rubber grommets...These wee trinkets slid onto the poles and had a nice groove for the line to bite into..Still used a clove hitch to secure the line,..but had a far greater versatility for dropping the height of the net, to suit the various sets and locations...

Edited November 18, 2015 by Phil Lloyd

[lifelong cumbrian 1,826]

I use grommets now, as said far better and they don't perish.