Foz_1983 13 Posted October 13, 2015 Report Share Posted October 13, 2015 I'm thinking about turning my .22 ultra into a .20 So has BSA ever made a .20 barrel of so where can I get one? Also has anyone had any experience in this? Are there any Tuners/gunsmiths that would do the work? Cheers! Quote Link to post
moxy 617 Posted October 13, 2015 Report Share Posted October 13, 2015 https://www.gunspares.co.uk/products/24912/20-5mm/ You may need a man with a lathe and know how. But easy enough. Quote Link to post
villaman 9,982 Posted October 13, 2015 Report Share Posted October 13, 2015 Have a word with XTX AIR Quote Link to post
Rez 4,961 Posted October 14, 2015 Report Share Posted October 14, 2015 Just saying... Is it more cost/effort than it's worth... Again. Just saying Quote Link to post
Deker 3,478 Posted October 23, 2015 Report Share Posted October 23, 2015 Just saying... Is it more cost/effort than it's worth... Again. Just saying Just look out for a decent used .20, it will be cheaper and you will have 2 rifles! 1 Quote Link to post
airtech 39 Posted November 24, 2015 Report Share Posted November 24, 2015 Bsa never made a .20 barrel. you would have to use another make like loather walther. i have done this conversion on a number of single shot ultras. but a multi shot means you need to have a .177 mag machined the mags are around £39 then there is the machining cost of the mag and barrel cost and probe cost barrel blank is around £105 by time your finished you wont be far from £200 Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.