Jump to content

Bsa Ultra Se Multi .22 Help


Recommended Posts

I changed from using springers about 3 weeks ago and bought my self the ultra se .22 and I do love the rifle its just iv bought almost every pellet on the market to try and find the best for my barrel. The problem I am having is that once im zero'd in all is good and then I will refill my air with my stirrup pump to around 200 bar and then my shots are either to far left or to far right and sometimes to high or low at the same time :( . I feel like I have to zero in every time I shoot any help would be great cheers Mike.

Link to post

All is tight mate and I am very careful when I am refilling air . I get around 40 shots from a 200 bar fill but I normally only do 30 then refill so I shoot between 200 bar down to 100. Shouldn't my sweet spot be there and would that effect pellets moving left to right? I also use a rifle bench rest to remove human error cheers Mike.

Link to post

Sounds like "crossover" Mike, any windage involved, are you indoors or outdoors with the scope zero.

At short range do your pellets strike one side of the target and then at longer range strike the other side of the target ?

Scope cant might well be in the mix also

Edited by mark williams
Link to post

Yea everything is tight but I zero'd in last night at 25 yards and I could hit a drawing pin so I was happy. Then I had another go this morning with the same pellets and they were firing about 2 inches! to far left so I keept going until it was back down to 90 bar to see if that was the problem but they all grouped 2 inches left. There was no wind at all and my range is very enclosed too cheers for all the replies :)

Link to post
  • 4 weeks later...

Hi Mike

 

I have suffered with this on some of my pcps when using a pump. When rifle is filled, the air cylinder expands and contracts and can cause microscopic movements to the barrel bands. This can cause loss of Zero. I experienced this with both my HW100 and AA s410. As i mainly hunt, i would fill the rifle before leaving home, and then check zero on arrival to my permission.

 

Hope this helps.

Edited by darkdd81
Link to post

Have you try,d jsb exact jumbo 15,89 my grand sons ultra loves them

 

take your mod off and give it a shake if you can hear a rattle it means the pellets are clipping it on the way out

 

if you have not got another scope borrow one and try that

 

Where a bouts are you in the north east micheal

 

and what shooting range do you use ,,,smiths or swarland

 

i could meat you and help you sort it out ill take one of my scopes off one of my rifles and you can see if its that before you buy another set

 

but it sounds like the scopes to me

 

and ill fill it off my bottle just in case its the pump that you are using as darkdd81 has say,d

 

let me no bud

 

atvbmac :thumbs: :thumbs: :thumbs:

Link to post

 

Have you try,d jsb exact jumbo 15,89 my grand sons ultra loves them

 

take your mod off and give it a shake if you can hear a rattle it means the pellets are clipping it on the way out

 

if you have not got another scope borrow one and try that

 

Where a bouts are you in the north east micheal

 

and what shooting range do you use ,,,smiths or swarland

 

i could meat you and help you sort it out ill take one of my scopes off one of my rifles and you can see if its that before you buy another set

 

but it sounds like the scopes to me

 

and ill fill it off my bottle just in case its the pump that you are using as darkdd81 has say,d

 

let me no bud

 

atvbmac :thumbs: :thumbs: :thumbs:[/quote

]

 

Very kind offer there Mac.

  • Like 1
Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
  • Recently Browsing   0 members

    No registered users viewing this page.

×
×
  • Create New...