midfeild general 0 Posted July 31, 2015 Report Share Posted July 31, 2015 just received my secondhand 410 only to find the magazine wont just push in.Not wanting to force it no doubt al be taking it to local gunsmith.A dont know if the gold ring at far end of breach is meant to be flush?Any help readers would be appreciated thanks Quote Link to post
Durham John 693 Posted August 1, 2015 Report Share Posted August 1, 2015 just received my secondhand 410 only to find the magazine wont just push in.Not wanting to force it no doubt al be taking it to local gunsmith.A dont know if the gold ring at far end of breach is meant to be flush?Any help readers would be appreciated thanks By that I take it you mean the end of the barrel is showing into the mag housing opening? it should be flush with the opening only. You should be able to loosen the two barrel clamp screws and nudge the barrel slightly so it becomes flush. Be careful not tp try and twist it forwards or you run the risk of miss aligning the transfer port/barrel holes. pic third post done shows brass end cap http://www.thehuntinglife.com/forums/topic/217767-aa-s410-pellet-mag-problems/ regards John Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.