New Hutch Dimensions

[max_wood 161]

Hi everyone.i am building some new hutches.4foot long in total.should i make the partition between bed area and day area 50/50 or 1ft 3ft? Thankyou

[Flacko 1,756]

18 inches bed try and give plenty of run room mate more the better atb Flacko

[dogger 100]

1ft more than enough

[max_wood 161]

Thanks for that.will make it 1ft i think. its 3ft deep so should be plenty.cheers guys

[The one 8,544]

I would also make it a foot , it will be easier for the ferrets to keep warm in the winter and give them more room to exercise

[TOMO 27,459]

I've just built a new hutch,,,,7 foot long by 3 feet,,,and it's almost 6 foot tall,,,,it's split in half an upper and lower hutch,,,,loads of room with a wheel in each section,,,,the bed area as the others have said is a foot wide

[The one 8,544]

Mine mostly sleep in the run anyway it's only in the winter they use the sleeping compartment

[northern lad 2,292]

I've just built a new hutch,,,,7 foot long by 3 feet,,,and it's almost 6 foot tall,,,,it's split in half an upper and lower hutch,,,,loads of room with a wheel in each section,,,,the bed area as the others have said is a foot wide

We call something that size a shed

[TOMO 27,459]

It's made from 2x2 and half inch ply,,,,weighs a ton,,,,I had to move it using a skate board under one end,,,and lifting the other,,,combined with loads of swearing,,lol

[northern lad 2,292]

It's made from 2x2 and half inch ply,,,,weighs a ton,,,,I had to move it using a skate board under one end,,,and lifting the other,,,combined with loads of swearing,,lol

Just an idea,but you could buy 4 castors Screw them to a piece of wood.....then you would have a skateboard for both ends

[Leeview 791]

Hi everyone.i am building some new hutches.4foot long in total.should i make the partition between bed area and day area 50/50 or 1ft 3ft? Thankyou

How high are you making your hutches? think about raising the bed area off the floor and a ramp/pipe to enter through, hinged door for cleaning out and they've got33% more floor area to use.

Y.I.S Leeview

[max_wood 161]

3foot tall so i could do that. Also to anyone that has the exercise wheels, do they use them much and where's the best place to get them? Cheers

[stealthy1 3,964]

3foot tall so i could do that. Also to anyone that has the exercise wheels, do they use them much and where's the best place to get them? Cheers

 

Mine love the wheel

[Leeview 791]

3foot tall so i could do that. Also to anyone that has the exercise wheels, do they use them much and where's the best place to get them? Cheers

click the link below

Y.I.S Leeview

[max_wood 161]

 

 

It's made from 2x2 and half inch ply,,,,weighs a ton,,,,I had to move it using a skate board under one end,,,and lifting the other,,,combined with loads of swearing,,lol

Just an idea,but you could buy 4 castors Screw them to a piece of wood.....then you would have a skateboard for both ends

I have got a big heavy chicken house that was a nightmare to move.i drilled 2 small holes 12 inches apart, looped a piece of rope through and tied.did it both ends and use them as cheap easy handles.2blokes can move it easy now