Hw 100 Leak

[budharley 945]

Hi fellas think I've got a little leak on my 100 ,I filled the tank to 200 on Tuesday evening it's sitting at 160 now ,any help is appreciated on fixing it cheers

[barrywhite 282]

might be the little o ring between the cylinder and the gun .mine played up after i knocked my gun over , i may have bent somthing a bit , but replacing the little oring has fixed my problem for know .if I rotate the cylinder to much I recon the leak may come back .

[mark williams 7,563]

Hi Bud - gunsmiths = guarantee - take it to the gunsmiths lad

 

atb

[budharley 945]

Gunsmiths it is then , I'm not clued up enough to even think about tackling it .if it's just an oring that's easy enough but anything inside I'm clueless .

[Lloyd57 98]

I had the same problem last week, it turned out to bea very small o ring nr the trigger mechanism, RFD did not charge me for replacing it, alls well now.

Lloyd

Edited June 12, 2015 by Lloyd57

[Rez 4,961]

Has it been shot since its fill? I fill mine to 200, on the money, but give it a few days and the pressure drops. In fact, if you fill you own 100 to 200 bar, leave it ten minutes and you'll find there is 190'ish in it as the pressure settles... obvs over a period of days I wouldn't expect it to settle 40 below, but its something to bear in mind. There maybe nothing wrong with it at all.

 

As an edit, if its filled fast this happens. It actually still happens when filled slow but a lot less.