Zero A Scope

[Bonham 4]

I currently have a HW80, and would like to know, what is the best, 25m or 30m, for zeroing in.

[jonnie bravo 572]

What cal is it? And is it sub 12ft/lbs?

[tote 854]

Depends on the calibre, closer for a .22 [25 or 30m] and .177 [30 - 35m], also depends on how competent a shot you are.

[Bonham 4]

its a .22, and I am using Crossman dome, 14.5 grain

[jonnie bravo 572]

If you don't want any hold under (where your point of impact will be higher than the centre of your crosshairs) then 25 is a good bet. I prefer it this way less to think about but you will need to calculate more drop for longer range shots. 30 is good if your scope is pretty high

[sureshot.177 49]

I don't think you could go wrong with 25-30m as long as you no your aim points

[mark williams 7,550]

Hi mate take a look at best zero range in the search engine option - all is there. (top right on this page).

[pianoman 3,587]

30 metres for .22 is the optimum distance. Set up a series of targets at ranges you are likely to see rabbits pop out of hedge rows and the like and try practicing on these to see precisely where your shots at this zero-range distance are falling over varying ranges..

[Dr B 186]

For my set up (S410, AA fields, .22), Chairgun says 29yds is the optimal zero. However, I prefer to zero at 28yds as the pellet rises less through the mid-distance giving me better accuracy across the range. I have a report on here somewhere - so please check it out.

 

With my scope set to x7, its one mil-dot down for a perfect zero at 40yds and just a tab more than 2 mil-dots for 50yds. Very intuitive.