sharpshooter25 7 Posted April 23, 2015 Report Share Posted April 23, 2015 Just got myself a lovely R10 with a Humma reg fitted, trigger anti tamper in place and is running Hot. Unsure on the reg pressure setting as I don't no what the original owner ordered. Just looking for comments from members who have experienced this reg and there thoughts, seems consistent over the chrono. Didn't want to remove the anti tamper but had to to reduce hammer spring tension. Willing to post chrono results if people are interested in the reg as I don't have a standard Mk2 reg to compare it to Quote Link to post
villaman 9,983 Posted April 23, 2015 Report Share Posted April 23, 2015 So what are the chrono results then Quote Link to post
reaper1064 285 Posted April 23, 2015 Report Share Posted April 23, 2015 I'd contact Darrin at XTX as he sells them, he s really approachable. Quote Link to post
JBWALES 5 Posted May 6, 2015 Report Share Posted May 6, 2015 How did you reduce the hammer spring tension without removing the anti-tamper. Sounds like the reg was fitted without making the necessary adjustments or the HUMA reg pressure was set higher than the original. The adjustments are very fine for a large increase either way. John. Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.