The Modern Pnuematic Airgun By H M Buckley

[Jon Hutty 0]

I live in hull phil it was actually for study purposes first then i purchased the book and your right it is all about the tools. Like anything if you want to start to create or build something everyone has to start from scratch. I will buy the inexpensive tools first of all like rasps and so on. I have the use of a drill press band saw dremel multi tool chisels the only main item i haven't got use of at the moment is a hobby metal lathe to do the metal work with like the action and so on. But has i have been told if you want to make my own pneumatic from start to finish that means stock aswell. And a couple of the guys i talk too who make custom stocks have told me when starting a stock draw a rough outline of the stock you want too shape and then start with the in-letting. Has they have told me if i cannot complete the in-letting it is pointless in carrying on with the project i would be just wasting my time and money. So i am going to buy some poplar has its fairly cheap easy to work on and good for practising. If you do not get it write the first time. So i hope this answers your question thx for your reply.

[philpot 5,000]

I admire your drive to do such a big job and the best of luck with it. I might see you one day at Humberside Shooting Ground with your gun.

 

Phil

[Jon Hutty 0]

Thx for the reply phil but to be honest i have never been to the humberside shooting grounds in driff but may go this summer one weekend to check it out. I have been told there is a gun and rifle club in hull near the town center but still have to find out about it. So if i do i will pm you and then i may see you there ok mate.