Nitevis74 47 Posted February 22, 2015 Report Share Posted February 22, 2015 Hi guys just noticed I've got a leak in my hw 100s charged it Friday full to the top and today it's down to 160 bar ,I've not used it the weekend any suggestions Quote Link to post
airtech 39 Posted February 24, 2015 Report Share Posted February 24, 2015 we have had a number of hw100 in over the past couple of months with a similar problem take the action out of the stock and you will see a little hole by the back screw that holds the action into the stock put a little oil over the hole and see if it bubbles. if it does then the seals onthe reg are leaking the seals on the reg are very thin Quote Link to post
vizlauk 1,568 Posted January 24, 2016 Report Share Posted January 24, 2016 Another prone place for the hw100 to leak is the small o ring that sits on where the cylinder screws onto the action, remove your silencer, then unscrew the air cylinder , you will see a small o ring ! Chances are its that ! 2 Quote Link to post
toby63 1,236 Posted January 24, 2016 Report Share Posted January 24, 2016 Hi guys just noticed I've got a leak in my hw 100s charged it Friday full to the top and today it's down to 160 bar ,I've not used it the weekend any suggestionsare you filling more than 200 bar ? Quote Link to post
David Aiken 253 Posted January 24, 2016 Report Share Posted January 24, 2016 Mine leaked, it was the cylinder. A smear with silicon grease around the `o` ring soon sorted it. The `o` rings are prone to becoming dry. Quote Link to post
Nitevis74 47 Posted January 25, 2016 Author Report Share Posted January 25, 2016 All sorted now cheers Quote Link to post
David.evans 5,323 Posted January 25, 2016 Report Share Posted January 25, 2016 Come on then tell us what was wrong ? 1 Quote Link to post
villaman 9,982 Posted January 25, 2016 Report Share Posted January 25, 2016 So what was wrong with it ? Quote Link to post
Nitevis74 47 Posted January 26, 2016 Author Report Share Posted January 26, 2016 It was the o ring on the air cylinder ,undone the cylinder took of the o ring put a smear of silicon oil on it and reassembled it hey presto it just needed to be cleaned off and reseated thanks guys Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.