GruffaloGriff 1,858 Posted February 15, 2015 Report Share Posted February 15, 2015 Built this years ago at maybe age 12 or 13, it has lain in the shed forgotten but just found it the other day. I repaired it making a new spring steel retainer for the bolts and a new bolt also gave it all a coat of wax and a bit of TLC. Bow is spring steel from a hand saw blade. Unbelievably fast and very powerful for its size, not something i would want a twelve year old on the loose with today! Last picture was shot point blank but gives an idea of power. 7 Quote Link to post Share on other sites
sussex 5,777 Posted February 15, 2015 Report Share Posted February 15, 2015 Could you imagine old bill pulling a twelve year old today with that .. bet you had a load of fun with it ... 1 Quote Link to post Share on other sites
bigoy19706 276 Posted February 15, 2015 Report Share Posted February 15, 2015 if i was makeing stuff like that at 12 they of been a lot of very upset cat about lol 2 Quote Link to post Share on other sites
GruffaloGriff 1,858 Posted February 16, 2015 Author Report Share Posted February 16, 2015 if i was makeing stuff like that at 12 they of been a lot of very upset cat about lol Seemed to have a facination at that age with high speed projectiles. Once made a minature muzzle loader that would shoot a single grain of shotgun shot through a tin can, thankfully I never shot the cat! Quote Link to post Share on other sites
flint2009 1 Posted February 16, 2015 Report Share Posted February 16, 2015 That looks smart 1 Quote Link to post Share on other sites
Lenmcharristar 9,732 Posted November 24, 2015 Report Share Posted November 24, 2015 good stuff again 1 Quote Link to post Share on other sites
HPR 1,160 Posted November 25, 2015 Report Share Posted November 25, 2015 Good that griff how far is it accurate at Quote Link to post Share on other sites
GruffaloGriff 1,858 Posted November 26, 2015 Author Report Share Posted November 26, 2015 Good that griff how far is it accurate at Shot that apple off my boys head at 30 yards. ................. Seriously though with no sights it's not that good for long range, probably 6 inch grouping at 12 feet maybe a bit better depends on the bolts, that one in the pic is pretty good- bamboo shaft, feather fletch, spring steel broad-head. So unless you want to hunt mice at 6 feet it is only good for impressing your mates. It would be interesting to put a chrony on it as it is unbelievably quick, at close range(6feet) you hear the thwack of impact at the same time as puling the trigger. You also hear impact at the same time you feel the recoil which is an uncanny feeling that keeps me going back and doing it again and again. Quote Link to post Share on other sites
Gl28 4 Posted June 8, 2016 Report Share Posted June 8, 2016 Sorry to revive an old thread, How did you make the retaining Spring ? 1 Quote Link to post Share on other sites
spsurfer 891 Posted June 9, 2016 Report Share Posted June 9, 2016 Great X Bow!! As a boy (over 30years ago) I made all kind of bows, x-bows, guns, spears, sling shots.. etc. A mirracle I'm still allive as once a "gun" (steel tube closed with a screw, powder, nails...) exploded and the screw went through a 1cm thick wooden plank... imagine me aiming... Regards Nicolas 2 Quote Link to post Share on other sites
GruffaloGriff 1,858 Posted June 10, 2016 Author Report Share Posted June 10, 2016 Great X Bow!! As a boy (over 30years ago) I made all kind of bows, x-bows, guns, spears, sling shots.. etc. A mirracle I'm still allive as once a "gun" (steel tube closed with a screw, powder, nails...) exploded and the screw went through a 1cm thick wooden plank... imagine me aiming... Regards Nicolas Aye that was proper childhood. Once(35years agoe) put one of those small disposable co2 cylinders through a stone wall with a "cannon" (pipe packed with paper caps & match heads). Another time a "cannon" full of weed killer blew up and desintergrated the 3 concrete blocks i had it propped up on.............happy days........be labeled as a terrorist if you did stuff like that now. 1 Quote Link to post Share on other sites
GruffaloGriff 1,858 Posted June 10, 2016 Author Report Share Posted June 10, 2016 Sorry to revive an old thread, How did you make the retaining Spring ? Think this one was a bit of coil spring out of a hoover cord retrieve. Junior-hack-saw blade works too just heat the bit you want to bend or it snaps. Quote Link to post Share on other sites
Gl28 4 Posted June 15, 2016 Report Share Posted June 15, 2016 Spot on, my mates got a broken one so will give it a go. Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.