Nick8310 40 Posted February 12, 2015 Report Share Posted February 12, 2015 Hello everyone when I am not out shooting I am a flooring specialist. Anything which goes on a floor I can help you with any problems I will see if I can point you in the right direction. CarpetVynlKardeanSolid woodsScreedsLiquid DPMAmticoLaminatesEngendered woodsPlyFeather finishes Hard bording Nick. (I know a little about wielded vinyl and ceramics but i should still be able to point you in the right direction with them.) 4 Quote Link to post Share on other sites
j j m 6,564 Posted February 13, 2015 Report Share Posted February 13, 2015 Usefull chap to know Quote Link to post Share on other sites
Nick8310 40 Posted February 13, 2015 Author Report Share Posted February 13, 2015 Usefull chap to know Well I try to be of use to as many people as I can ? Quote Link to post Share on other sites
Nick8310 40 Posted February 14, 2015 Author Report Share Posted February 14, 2015 Hi there nick I've a concrete floor that I want to put wood on, the stuff about 10 mm thick ,can you reccomend a good insulation to go under it also tiles on concrete is there a good/simple way to insulate them. Cheers Joe. Depends on the wood good man is it a laminate, engineered or solid wood also is the subfloor nice and level. With tiles I would say the only real way to stop your feet freezing on them early mornings or cold winters is to have underdfloor heating simpliset and easiest way would be a pre set one your just unroll it and then tile over it. Remember though just do the parts that you will be mainly walking on silly buying loads of underfloor heating to put under a couch. When it comes to underfloor heating you just want something to take the chill off the tiles so running costs should be low no need to get to the point where you can cook bacon on your floor. A little tip though remember to get adhesive and grout that are underfloor heating friendly. Anything else just ask chap. Nick.? Quote Link to post Share on other sites
skinner 348 Posted February 14, 2015 Report Share Posted February 14, 2015 Hello everyone when I am not out shooting I am a flooring specialist. Anything which goes on a floor I can help you with any problems I will see if I can point you in the right direction. Carpet Vynl Kardean Solid woods Screeds Liquid DPM Amtico Laminates Engendered woods Ply Feather finishes Hard bording Nick. (I know a little about wielded vinyl and ceramics but i should still be able to point you in the right direction with them.) good on you nick Quote Link to post Share on other sites
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.