Beastmaster1980 40 Posted February 5, 2015 Report Share Posted February 5, 2015 Hi, after some help. As above my super 6 will not fill with air. I am using a stirrup pump and had no trouble for 2 years, was fine last 200 bar fill but went to fill it today and the air seems to be not getting passed the fill adapter as it is pushing the pump handle back up from the back pressure. I have tapped the fill probe with to make sure it is seated properly & a burst of air came out so doesn't seem to be stuck, tried filling cocked & I'm cocked but no luck. Any ideas? Quote Link to post
shadow_sniper 47 Posted February 5, 2015 Report Share Posted February 5, 2015 Inlet valve on air cylinder? Quote Link to post
Beastmaster1980 40 Posted February 5, 2015 Author Report Share Posted February 5, 2015 Is that different to the fill probe what the fill adapter pushes on to, is it in the cylinder? Is there anyway to test its working don't knowmuch about the mechanics of pcp's. Would you try & fill it will a gas bottle rather than stirrup pump see if it opens inlet valve? Quote Link to post
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.