Mole Traps In The Frost

[JustinSB 2]

Best of luck & I'm really interested to hear how they work out. From the look of the design, they look like they could be pretty much indestructible, but prone to losing the small square "trigger". They also seem to live mostly underground, so they might be very useful in places where there lots of rather light-fingered passers-by...

[IanB 0]

If the ground is frozen solid I would wait for better conditions, if your setting traps in a large numbers..But on certain occasions I've just got on with it, the best way I find is to dig the sod out, bed the trap in, use the sod to cover and pack then using the spade slice the top of a nearby mound, and just place the frozen mound on top, it doesn't hinder the trap firing and keeps the surface frost off...

[torchey 1,328]

Best of luck & I'm really interested to hear how they work out. From the look of the design, they look like they could be pretty much indestructible, but prone to losing the small square "trigger". They also seem to live mostly underground, so they might be very useful in places where there lots of rather light-fingered passers-by...

. For the trigger I just tie them with a bit of builders string line it's strong and thin also if you do lose any of the squares you can make your own out of metal coat hangers.....very good traps

[OldTrapCollector 377]

This type of simple wire trap has been used for a long time in France, nearly a hundred years, and were colloquially known as 'Aurouze' traps after the Paris manufacturers of that time. I have not used them, but I have handled many different versions over the years and find that the temper leaves the copper ones faster than the iron ones, and that they can be improved in use by the addition of a flat round washer with small cut outs at the edge in place of the wire square 'setter'. This can be attached by means of a small string or wire to the trap so it is not lost.

 

Don't follow the photo in a certain Mole Trapping book where the author mistakenly :whistling:places the setter in the entirely wrong way either ... ... they are meant to be set flat or longways along the run - the curved-up parts kill the mole not the long legs

[perthshire keeper 1,239]

This type of simple wire trap has been used for a long time in France, nearly a hundred years, and were colloquially known as 'Aurouze' traps after the Paris manufacturers of that time. I have not used them, but I have handled many different versions over the years and find that the temper leaves the copper ones faster than the iron ones, and that they can be improved in use by the addition of a flat round washer with small cut outs at the edge in place of the wire square 'setter'. This can be attached by means of a small string or wire to the trap so it is not lost.

 

Don't follow the photo in a certain Mole Trapping book where the author mistakenly :whistling:places the setter in the entirely wrong way either ... ... they are meant to be set flat or longways along the run - the curved-up parts kill the mole not the long legs

could they not be made from say 3mm high tensilesteel wire?

[torchey 1,328]

Wether set on their back or on the side as long as the two feet are pushed into the run you,ll kill moles..

[bobcullen79 1,495]

Those look like the ones ... I just I wish I could speak French to order them .......

Visit the link via a laptop and use google translate, it`ll translate the page?

[bobcullen79 1,495]

Didnt get as far as page 3..

[Mr Muddy 141]

For what you pay they're very good, very humane traps (a bit fiddly though); but they're not copper - just copper plated - so I carry a scythe stone with me to scrape the rust off before I set them in the ground.

I'd also buy a couple of the setting pliers, or you'll have a job setting them without a pair, and they're bloody easy to misplace.

Edited February 5, 2015 by Mr Muddy

[Mr Muddy 141]

Like I said; I do like these traps. But one mole I caught today seems to be in two minds about them.

 

[iwm 71]

 

This type of simple wire trap has been used for a long time in France, nearly a hundred years, and were colloquially known as 'Aurouze' traps after the Paris manufacturers of that time. I have not used them, but I have handled many different versions over the years and find that the temper leaves the copper ones faster than the iron ones, and that they can be improved in use by the addition of a flat round washer with small cut outs at the edge in place of the wire square 'setter'. This can be attached by means of a small string or wire to the trap so it is not lost.

 

Don't follow the photo in a certain Mole Trapping book where the author mistakenly :whistling:places the setter in the entirely wrong way either ... ... they are meant to be set flat or longways along the run - the curved-up parts kill the mole not the long legs

could they not be made from say 3mm high tensilesteel wire?

 

I have use of a machine at a relatives work place that bends tensile steel wire to any size/shape if i could get hold of one of these traps i am sure he could make them here.????

Cheers

IWM.

[Mr Wilkes 2,986]

Where in Yorkshire are you ? Pm if you prefere.

[iwm 71]

Where in Yorkshire are you ? Pm if you prefere.

Pm sent

iwm

[socks 32,253]

 

 

This type of simple wire trap has been used for a long time in France, nearly a hundred years, and were colloquially known as 'Aurouze' traps after the Paris manufacturers of that time. I have not used them, but I have handled many different versions over the years and find that the temper leaves the copper ones faster than the iron ones, and that they can be improved in use by the addition of a flat round washer with small cut outs at the edge in place of the wire square 'setter'. This can be attached by means of a small string or wire to the trap so it is not lost.

 

Don't follow the photo in a certain Mole Trapping book where the author mistakenly :whistling:places the setter in the entirely wrong way either ... ... they are meant to be set flat or longways along the run - the curved-up parts kill the mole not the long legs

 

could they not be made from say 3mm high tensilesteel wire?

I have use of a machine at a relatives work place that bends tensile steel wire to any size/shape if i could get hold of one of these traps i am sure he could make them here.????

Cheers

IWM.

It would be very interesting to see what price he could produce them for .......

[iwm 71]

 

 

 

This type of simple wire trap has been used for a long time in France, nearly a hundred years, and were colloquially known as 'Aurouze' traps after the Paris manufacturers of that time. I have not used them, but I have handled many different versions over the years and find that the temper leaves the copper ones faster than the iron ones, and that they can be improved in use by the addition of a flat round washer with small cut outs at the edge in place of the wire square 'setter'. This can be attached by means of a small string or wire to the trap so it is not lost.

 

Don't follow the photo in a certain Mole Trapping book where the author mistakenly :whistling:places the setter in the entirely wrong way either ... ... they are meant to be set flat or longways along the run - the curved-up parts kill the mole not the long legs

could they not be made from say 3mm high tensilesteel wire?

I have use of a machine at a relatives work place that bends tensile steel wire to any size/shape if i could get hold of one of these traps i am sure he could make them here.????

Cheers

IWM.

It would be very interesting to see what price he could produce them for .......

 

I will talk to him this weekend but he will need a profile to work from. It must be the sameprice as the ones from france or no one will buy them??

iwm